Cupra emblem in black for facelift

Melfinos

Lebt hier ★
Supporter
European-Union
You can also repaint it yourself ;)

Currently, there don't seem to be many providers and demand, which is certainly why the price is so high.

For me, it would only be an option for a vehicle painted in white / Taiga Grey.
I like the copper-colored design here

I find it a pity, for example, with the VZ I ordered, that the Cupra & VZ lettering at the rear will not be in copper color from the factory.
 
Last edited:
For me, the copper color belongs to CUPRA; I can't imagine any other color better. With my Seat 5F, I changed it to black, but with the CUPRA, that wouldn't be an option for me 😁
 
Last edited:
Can someone tell me how the emblem is attached to the front of the hood? I looked at it in the shop from the link above and I'm a bit puzzled. :D
 
nonsense was written here. @ST4N knows the answer.
 
It's stated on the linked page: 😉

Montage:
  • "Old" top part of the existing emblem unclipped.
  • "New" top part of the emblem clipped in, which then locks into the bottom part - DONE!

A small addition: The VZ logo and lettering at the rear are glued on!
 
Yes, that’s exactly what confused me a bit. In the pictures, you can see this large black plastic part with the openings for the clips.
Where exactly is that located? Under the bonnet? Is that included? :D
 
Definitiv
 
Günstiger, ja - kann aber beim folieren nicht umgelegt werden.

Mir persönlich gefällt es foliert deutlich besser (kenne es aber auch nicht komplett ausgetauscht - baue auf das Treffen Ende September 😬🤞)
 

Attachments

  • IMG-20250904-WA0007(1).jpg
    IMG-20250904-WA0007(1).jpg
    306.6 KB · Views: 86
Wo lagen dort die Kosten? Hat das Schwarz auf der Folie eine Raue Struktur? Wirkt auf dem Bild so
 
Ich hab mehrere Sachen machen lassen - das Logo alleine dürfte so bei 30€ liegen.

Nein, es ist glatt.
Die Folie nimmt aber sehr genau die Struktur des Materials darunter an und das CUPRA-Logo ist etwas "rauer".
 
Das passt doch vom Preis her Falls man sich auf dem Treffen sieht, schau ich mir das mal Live an
 
Sieht auf jeden Fall gut aus.

An sonsten könnte das Logo für die neue Tribe-Edition 2026 auch eine Alternative sein (Kosten?), das soll schwarz/chrom sein.
 
Erstmal muss man einen Folierer finden, der so "Kleinscheiß" macht. Für die meisten lohnt der Aufwand nicht und die lehnen das direkt ab. Hatte schon ein paar angefragt.
 
Vielleicht eher, wenn du es mit dem Folieren von Ladekante o.Ä. verbindest...?
 
Wenn das evtl zur Sprache steht, lass ich es zusammen mit der Scheibentönung machen Vielleicht passt es für den Folierer dann
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top