Active Lane Change & Remote Parking via App

Kuschel1234

War schon mal da
Hello everyone, the official current product catalog and the Manual* for the CUPRA Terramar describe two functions that are not available in the Cupra Terramar:
  • The Automatic Parking System Plus with Fernbedienungsfunktion about the MyCUPRA App (parking in and out via mobile app)
  • The active lane change assistant (autonomous lane change as part of Travel Assist, as already used in the CUPRA Leon)
Is there any information from Cupra as to why these functions are currently not included in all Terramar models (even though described in the Manual* and in the product catalog) and whether their retrofitting or activation will be possible in a future update? Softwareupdate What is intended?

I have model year 2026 and all equipment packages.

I have not received an answer from Cupra customer support regarding this.

Thank you very much.
 

Attachments

  • Screenshot_20250920_125534_Samsung Internet.jpg
    Screenshot_20250920_125534_Samsung Internet.jpg
    250.7 KB · Views: 73
  • Screenshot_20250920_125703_Samsung Internet.jpg
    Screenshot_20250920_125703_Samsung Internet.jpg
    294.2 KB · Views: 73
  • Screenshot_20250922_163154_Adobe Acrobat.jpg
    Screenshot_20250922_163154_Adobe Acrobat.jpg
    198.6 KB · Views: 73
Ich muss das Thema auch nochmal aufgreifen…ich habe meinen Terramar Ende Mai 2025 bestellt (und im August abgeholt). Bei mir funktioniert trotz Intelligent Drive Paket XL (WF1) der „aktiven Spurwechsel“ nicht (und ich denke, ich habe alles richtig eingestellt - TA ausgewählt und aktiv) - autonomes Einparken schon gar nicht. Gibt es hier mittlerweile Terramar-Besitzer, bei denen der autonome Spurwechsel funktioniert?
 
@DonPasta , Both use the same sensor near the wheel arch.
 
falls ihr denkt, dass das fahrzeug den spurwechsel vornimmt ohne dass ihr das lenkrad anfassen müsst, dann liegt ihr falsch. als ich im leon ausprobieren wollte, wie der funktioniert, dachte ich nämlich genau das. beim spurwechsel muss das lenkrad durchgehend berührt werden.
 
Der Spurwechsel wird gar nicht ausgeführt, ob ich das Lenkrad festhalte oder nicht. Sobald ich den Blinker antippe oder setze, wird der Spurhalteassistent bzw. Travel Assist ausgeschaltet und ich muss den Spurwechsel selber vornehmen (also selber lenken, Gas geben usw.)
 
wurde der pfeil für die freiè spur angezeigt? wird nur angezeigt, wenn travelassist läuft und hände am lenkrad sind und natürlich die zu wechselnde spur frei ist
 
Laut Handbuch* + Beschreibung auf der Webseite beim Terramar gibt es hier keinen autonomen Spurwechsel.
Der Spurassistent-Plus hat als Funktion einzig die Überwachung der Fahrzeugseiten + Crashverhinderung durch Lenkeingriff, wenn man selbst die Spur wechselt, aber zu wenig Platz ist oder sich von hinten sehr schnell ein anderes Fahrzeug nähert.

Hier gibt es auch ein kurzes Erklär-Video dazu


Etwas nach rechts schieben, es ist das Vorletzte mit der Überschrift "Spurwechselassistent".

Screenshot_20251231-075808~2.jpg
 
Ja, hatte ich auch gelesen und durch ein YouTube-Video falsch interpretiert. Seltsam nur, dass es wohl bei anderen Cupra Modellen funktioniert und nicht auch beim Terramar freigeschaltet ist.
 
Hallo Zusammen, ich möchte auch nochmal das Thema aufgreifen und bin die ganze Zeit am suchen. Ich habe jetzt ein Cupra Terramar Erstzulassung 11.2025 EU Import neu gekauft und bin jetzt 1.500 Kilometer gefahren. Mein Terramar hat das WF1 Intelligent Drive Paket XL. Auch meiner wechselt auf der Autobahn nicht die Spur durch antippen des Blinkers z.b. wenn ein LKW vor mir fährt und hinter mir und neben mir ist alles frei sollte er doch eigentlich automatisch auf die Fahrbahn daneben gehen (Lenkrad noch in der Hand) und dann überholen und wieder einscheren oder sehe ich das falsch ?

Ich habe folgende Systeminformationen :
Teilenummer Gerät 5FA035816C
Hardware: 11H
Software: 2768
ABT Hardware: H45
ABT Software 4047
Navigationsdantenbank: 24.6

Kann jemand helfen wodran es liegt ?
 
Der Terramar hat diese Funktion einfach nicht. Siehe auch Post #7.
 
So you only have the Assist Lane Change, meaning it must be activated in the settings. Then, with Travel Assist switched on, two white arrows appear, or grey if it is currently not allowed due to traffic or other obstacles. When the arrow is white, you have to tap the indicator in that direction and steer very gently in that direction with the steering wheel. Simply tapping does not cause steering, and steering too strongly cancels the process. For most people, the assistant is rather annoying because it steers very slowly and then also accelerates to overtake.

If you have probably already checked all this on your car, then it is currently temporarily deactivated for you, as it is for many others.
It was the same with my Leon until I received the major update, and now it is back, but I had to reactivate it after the update.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top