Cupra emblem front black for facelift

Nun, in der Anleitung* fehlt, dass man dafür zu 2t sein sollte, Hinweise, WIE man die Stoßstange entfernt, und vor allem auch, dass man sie danach auch wieder anbauen sollte und mglws auch das Frontradar neu eingestellt werden muss.

Bezweifle, dass der Hobbybastler das in 1 Std. schafft.

Einzig der Hinweis, es nicht unter 20° zu tun ist brauchbar.
 
Also beim Formentor VFL hatte ich anfangs nur die die Front vom Emblem schwarz foliert, sodass das kupfer seitlich noch zu sehen war. Das war ein sehr schöner Kontrast. Ich denke so werde ich es auch wieder machen wenn unser Leon endlich da ist.
 
Ja. Ein guter Folierer bekommt das sicher hin.


Angesichts des immensen Gebastels und Wiederverschweissen von Plastikstegen ist davon abzuraten, wenn man sowas noch nie gemacht hat.
 
Hat sich mittlerweile jemand die Mühe gemacht das Emblem zu tauschen? Wäre mal interessant wie der Aufwand einzuschätzen ist.
 
Noch nicht, ist glaube ich doch etwas mehr aufwand... ich werde mal beim Cupra Händler fragen, was das kosten würde. Emblem liegt schon bei mir.
 
Hi,
I would like to make the front emblem black on my Leon VZ, which I will receive in October.
Since it's a lease, it should be reversible, of course.
Finding a wrapper for this little job will be difficult, of course.

Can't this also be done with PlastiDip?
With a suitable painting stencil, it should be easy to do, right?
Screenshot_20260816_120025_Chrome~2.jpg
Has anyone done this before? I did the same with the emblems on my Ateca back then, it looked quite decent and the car wash was no problem either.
 
Yeah, well, that might be a bit too far... 😅

I can recommend two wrap shops here (in the Ruhr area) that would wrap the emblem.
 
You can also try it yourself. Cover the logo with masking tape, then trace the outline of the logo onto the tape, then peel off the tape and stick it to the back of the film and cut out the stencil that is created and stick it onto the logo. It only costs you the appropriate film (which you can get at any advertising printing shop). For a few euros, it can also be the 2nd or 3rd attempt that looks good.
 
I didn't do it any differently either; I cut the edges 2mm larger so that I could fold the edges over. With the hairdryer and a squeegee, it worked well and stayed in position.
20260625_133333.jpg

If you get up close with your nose, you can see it, but anyone who sticks their nose so close to other people's things has only themselves to blame 😜
 
Last edited:
I didn't do it any differently either; I cut the edges 2mm larger so that I could fold the edges over. With the hairdryer and a squeegee, it worked well and stayed in position.
View attachment 4337

If you get up close with your nose, you can see it, but anyone who sticks their nose so close to other people's stuff has only themselves to blame 😜
Then I guess I'll try that too; I think I even have some black film lying around (y)
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top