CUPRA Leon Sportstourer VZ Extreme 333PS (Taiga Grey) - Model Year 2026

@sonic6 I wouldn't do that, as it will sag (rubber, after all).
 
@sonic6 You can also take an OSB or MDF board and use the top one as a template. Then either place the tub on top or glue felt directly onto it. I did this for myself (there's also a topic here somewhere with pictures). If nothing heavy is to be placed on it, a thin MDF board is sufficient; it has the advantage of being significantly lighter than OSB.
 
Approximately 9-10cm (between the metal and the adjustable loading floor in the upper position)
 
I have my car back...

The change of the headliner has completely silenced the cracking noises!
And the glass plug is installed ✌️
 

Attachments

  • Heck gecleaned.jpg
    Heck gecleaned.jpg
    422.1 KB · Views: 74
It looks kind of strange without a wiper.:unsure:
 
It doesn't look bad. It will surely collect less dirt. I use the part from time to time, so it has to stay.
 
The look definitely takes some getting used to - but I personally like it more and more. 😊

The rear window is sealed, so it doesn't get dirty as quickly; for everything else, the rear camera is sufficient. 👌
 
Unfortunately, it is useless in bad weather
Well, I haven't been driving the car for just yesterday, and I must say that I get along very well with it, even in the worst case, I can also orient myself using the exterior mirrors.

For me personally, the rear window wiper was useless.
 
@flexiwo
No spray nozzle on the Leon? Well, my pre-facelift has even two of them. The nozzles are located in the wiper arm itself. Or does only the hatch have them?

20260621_110106.jpg
 
The snow screen has now also been removed...
In fact, without breaking anything. ✌️

Conclusion: after the first drive (just over 200 km - mainly highway/country road), I have to say that it really feels like it has a better response in the lower RPM range.

This could be completely subjective - it just felt a bit "peppier."
 

Attachments

  • Schneesieb VAG.jpeg
    Schneesieb VAG.jpeg
    1.2 MB · Views: 36
Last edited:
@Angefixt

Did you close the resonance chamber right away?
 
@dantheman I have only removed the snow sieve for now, as that is unproblematic.

As for the resonance chamber, I am absolutely unsure to what extent the operating permit could be revoked...
Then there's also the question: Iso-butyl or a plug? If it's a plug, should it be from a tuning manufacturer (VFT) or 3D printed from classifieds? 😅

I am more inclined to get a complete intake from APR, as that way you get all the advantages and no stress.
 
@Angefixt

The sound difference is quite noticeable, especially when you additionally open the intake path at the front. Then you can hear the intake noise much more prominently. 😉

To be honest, I wouldn't put in a lot of effort: Just buy a suitable square tube plug in 40x50 mm, install it cleanly, and seal the resonance chamber with it. It costs a few euros and serves the purpose.

APR is of course the nicer complete solution, but purely in terms of effect, you get quite a lot for little money with the simple variant. As for the operating permit, everyone has to know for themselves what they are doing. Technically, the plug works, but legally it's not automatically clean because the intake noise changes. In the end, everyone has to decide for themselves.
 
Last edited:
@Angefixt
Is the plug for the rear wiper dangling somewhere without any error message or similar, or does it need to be bridged somehow? How is the plug actually inserted? From the inside?
 
@dtmdriver
No errors.

The plug is glued from the inside.
 
b1b82895-644d-4b31-9c20-6c263ce56679-1_all_22209.jpgGood start to the weekend...
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top