Well, at least some people here write that the combustion engine starts up during kickdown, and you yourself said that too. And that’s exactly what I don’t want.
Here’s the scenario:
I’m driving in e-mode at the current outside temperature of -10°C, leaving home for the city, which is 15 km away.
At a junction 15 km further on, I want to turn, and a vehicle with right of way comes faster than expected.
Then I press the accelerator pedal fully and beyond the threshold, just to avoid hindering it.
At that moment, when the combustion engine starts up, it’s 100% certain the oil isn’t warm yet, and the combustion engine isn’t just spinning at 3,000 rpm because I’m currently performing kickdown.
Normally, the electric motor’s power should be sufficient in such cases—after all, as mentioned here, it takes some time anyway before the combustion engine kicks in.
I admit this is quite contrived, but I can think of many other situations where this could be problematic.
And doesn’t the constant on/off cycling in hybrid mode cause no fuel or moisture to enter the engine oil? Of course not… but that might not matter to a leasing customer. I, however, drive my cars up to 350,000 km.
Regarding your comment on how I handle this with the combustion engine:
I drive 10 to, more likely, 15 km at a steady pace, keeping engine speed at a maximum of 3–3.5 thousand rpm, until the oil temperature reaches at least 80 degrees, before I start accelerating.
And yes, I also disable the start/stop function as first gear, because I don’t believe I’d save enough fuel to justify the cost of a damaged starter, crankshaft bearing, or battery.
But I’m stepping back from this discussion, as the hybrid system is still far off for me, and I’m just here to gather information on what might come my way.
For me, it would be acceptable if I could force the different driving profiles myself and not have any programming forced upon me. That’s why my current car has a
Manual* gearbox and all assistants are switched off due to their nonsensical functions.