Is hybrid mode possible as standard?

ekm

V.I.P. ★★
Supporter
Germany
Is there a way to set the hybrid mode as the default at startup?

The hybrid is basically in electric mode from the start. I know it’s possible to do this yourself within a few seconds, but with fleet vehicles, which are driven by people who can just about manage to operate the vehicles because they can’t (or won’t) cope with the state of the art technology, this small detail is already too much of a challenge.

The dealers say it’s not possible, but
1. I have the feeling that not every technical detail of the vehicles is known there either, and
2. there are occasionally simple means and ways outside of official communication.
 
I will give it a try. However, this option requires coordination skills again, so it’s not a preferred method for the company either.. 😁
 
There we have the point, many still don't have a "modern vehicle" privately..☝️;)
 
I tested it earlier, it doesn’t work with our STs. 🤷‍♂️
 
They are not VL, model year 2023/2024

Start -> N -> Gas -> Nothing

But via the quick selection menu operation, I also switched the screen in the same time. ;)

My point was that hybrid is already the standard mode from the start.
 
So, ich hatte heute nochmal kurz dran gedacht und nach dem Start im "P" probiert, einmal ganz durch, dann war der Motor da..👍

Also nicht "N", sondern "P", dann funzt das ganze.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top