CUPRATD1234
Ist öfter hier
Hello,
I also need the help of the Forum. I have been driving the Cupra Leon 2.0 TSI Facelift (purchased as a new car) since May. Since delivery, I have been having problems with the left exterior mirror. The mirrors have the factory-installed carbon mirror caps.
The exterior mirror or the mirror glass (I believe it is more likely the mirror glass) vibrates more or less strongly depending on the road condition, speed, and wind conditions. On country roads, it is hardly noticeable and starts on the motorway at around 130/140 km/h. The vibrations increase the faster I drive, the worse the road condition, and the more wind there is. There are no vibrations noticeable in the right exterior mirror.
The workshop initially determined that the mirror glass has a lot of play in the housing, and as a result, the mirror housing was replaced. No improvement. Subsequently, the mirror glass was replaced, and again, no change.
I was present during the reinstallation of the mirror glass, and the inside of the housing looked quite solid...
The workshop manager indicated to me that they can now only make an inquiry to Cupra about how to proceed from here...
One fixed idea of mine would be whether it might be the mirror caps that are transmitting vibrations to the housing? Or could vibrations from the adjustment motors in the mirror housing be transmitted to the mirror glass? Could there also be vibrations transmitted from the bodywork? Does anyone have similar experiences or problems with this?
I would be very grateful for your ideas/suggestions!
I also need the help of the Forum. I have been driving the Cupra Leon 2.0 TSI Facelift (purchased as a new car) since May. Since delivery, I have been having problems with the left exterior mirror. The mirrors have the factory-installed carbon mirror caps.
The exterior mirror or the mirror glass (I believe it is more likely the mirror glass) vibrates more or less strongly depending on the road condition, speed, and wind conditions. On country roads, it is hardly noticeable and starts on the motorway at around 130/140 km/h. The vibrations increase the faster I drive, the worse the road condition, and the more wind there is. There are no vibrations noticeable in the right exterior mirror.
The workshop initially determined that the mirror glass has a lot of play in the housing, and as a result, the mirror housing was replaced. No improvement. Subsequently, the mirror glass was replaced, and again, no change.
I was present during the reinstallation of the mirror glass, and the inside of the housing looked quite solid...
The workshop manager indicated to me that they can now only make an inquiry to Cupra about how to proceed from here...
One fixed idea of mine would be whether it might be the mirror caps that are transmitting vibrations to the housing? Or could vibrations from the adjustment motors in the mirror housing be transmitted to the mirror glass? Could there also be vibrations transmitted from the bodywork? Does anyone have similar experiences or problems with this?
I would be very grateful for your ideas/suggestions!