12 GB large update for Terramar control units

Mein Cupra geht jetzt nach dem PV4 Update, dass dritte Mal in die Werkstatt, weil die Projektion der HD Scheinwerfer weiterhin falsch geschaltet werden .. es nervt so extrem... -.-
 
Oha, ägerlich zu hören und hoffe dass euch schnell geholfen werden kann.
Zum Glück für mich, dass meiner "nur" Matrix LED hat, nach dem PV4 Update nur das einzige Problem mit dem Bordbuch*, sonst läuft er bisher super.
 
Good morning, tomorrow is the day, 8:00 AM is the deadline for the update. Well, I'm curious to see if it suits him, if he doesn't feel bad during it and if he still recognizes us afterwards. I will report back if desired..... Regards.
 
Keep us updated, I would also be interested in what experience you have with it and whether you encounter any further errors or not.
 
So, I got it back this afternoon. So far, everything seems to be working. I had notifications like new settings available, APPS can be updated, and I had to go back to "share location" for the main user, and the onboard Manual* was reloaded. Let's see what the next few days bring. Regards. :coffee: ;)
 
What I noticed again today and it really annoys me. When I turn on the climate control via the app (whether heating or cooling), I also have to turn it off via the app again. Even if I drive the car in between and then park it. That was definitely different at the beginning. As soon as you used the vehicle for pre-cooling or pre-heating, the standard behavior of the climate control took over and everything turned off accordingly when parked.

Could someone please test what the behavior is like regarding this after the update?
 
@nersd So it's the same for me; if I drive within the 30 minutes and then get out again, you can simply press the climate control symbol in the bottom left of the infotainment when parking, and then it's off. Otherwise, the climate runs for the full 30 minutes and only then turns off. It should be the same for you.
 
Yes, I think that's a huge mess, especially since it worked properly at first. However, switching to automatic in the climate control (bottom middle) doesn't do anything for me. It doesn't interrupt the app setting for me.
 
No, press it down to the bottom left, not in the middle!
I'm about to finish work and will take a picture or video for you.
It doesn't bother me at all; when I start the climate control and take a drive for a bit, then park and turn off the car, I notice that it's running and can end it with one press, which really isn't a big effort for me. I'll show you what I mean.
 
Is the picture enough for you? I also made a video, but I can't manage that quickly...
 

Attachments

  • IMG_1597.jpeg
    IMG_1597.jpeg
    1.8 MB · Views: 48
The button is customizable. For me, it says "Car" with the three levels. However, I also don't have a SH from the factory.
 
Yes, for me the button is also Auto when the car is running, when I turn it off, or when the climate control is running, this button appears in the Auto position. But since you are not driving a PHEV, it is probably different for you.

That's why it's actually really easy to turn off the climate control if you haven't been on the road for more than 30 minutes...

@Schmitzibu
 
Sounds logical, as otherwise there wouldn't be a button for the SH.
 
Let's see if the information @nersd helps :)
 
Jain. The "button" has the identical function as the car button at the bottom right of the climate control. I have tested it a few times now. When the ignition is on, the button does not override the app setting. When you turn off the ignition, then (most of the time) yes. Once that didn't help either, and I still had to turn it off via the app.

But I still wonder what the point of it all is. If you want to pre-cool or pre-heat the car, then it's always just until you drive off. Why should it continue running after the trip? I find that to be total nonsense.

Especially since it worked the same way before some update.
 
Strange.... My predecessor (Skoda Diesel) had a Webasto installed from the factory. When I started it via the app, it always ran for 30 minutes and continued running when starting the engine. There was no stand cooling (only ventilation).

Maybe the new software no longer differentiates between combustion engines with conventional heating and hybrids with electric heating?
 
It's strange, it has never overwritten for me; it always ran for the full 30 minutes, even if my drive only lasted 20 minutes. It wouldn't be bad if it stopped after turning off, but as already mentioned, just pressing the button once and it's done. After turning off the vehicle, you can hear quite well when the blower continues to run.

For me, it's not that dramatic or bad; sure, it would make more sense otherwise, but it's not such a big problem for me.
 
I got my car back from the big update yesterday.
So far, luckily, no problems. According to the workshop, the update was mandatory for my vehicle anyway, even if I hadn't had any errors.

I don't notice any big differences so far.
The constant error at every vehicle start that the charging cable was connected and driving was not possible was definitely not there today.
However, the parking assist seems to have become even more sensitive. It already yelled at me today when I drove up to 2 meters behind the car in front at a red light at an intersection. According to the workshop manager, all the assists with the new software are supposedly less sensitive (I have turned off as many as I can because they are all complete rubbish). I still need to test the distance on the highway (unfortunately, it can't be deactivated), just like the transition from electric to combustion engine. Someone here in the Forum mentioned that it would finally be faster with the new software.
What I'm not quite sure about is whether the attention warning (what a useless piece of junk) was there before or has been added now. I first noticed it in the replacement car, as it is in the quick access bar there. Not in mine after the update, but it is there in the assist settings. I believe I didn't have it before.
I also need to keep an eye on the volume jumps from the infotainment system; they are supposedly fixed as well. Just like the constant forgetting of the favorites from the connected phones. I still need to observe whether it finally remembers them permanently now.
 
Last edited:

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top