CUPRA Leon e-Hybrid 2023 - E-Mode long locked after hybrid operation (struck-through E symbol)

MrCooooper

War schon mal da
Hello CUPRA Community,

I have a CUPRA Leon e-Hybrid Model Year 2023 I have been encountering a recurring issue with the electric driving mode for some time now.

Problem-Beschreibung:
  • After switching from E-Mode to Hybrid Mode (e.g., due to higher power demand or Manual* mode switching), a message will appear on the display. struck-through E symbol Displayed
  • The electric mode can then not activate anymore, although there is sufficient electric range available (battery is charged)
  • It sometimes takes 5-15 minutes drive, until the electric mode becomes available again
  • Speed and temperatures are normal.
  • After a motor restart (It works immediately again when the ignition is off/on)
My questions to you:
  1. Does anyone know this behavior from their Leon/Formentor e-HYBRID?
  2. Is this a known software issue or normal system behavior?
  3. Is there a software update that fixes this issue?
  4. What has helped you?
Has anyone taken the problem to the workshop? If so, what was done?
I would love to hear about your experiences.

Thanks in advance for your help!

Regards,
Cooper
 
Ich denke das ist ganz normal. Der Verbrenner samt Öl muss erstmal auf Temperatur kommen vorher blockiert das System und lässt dich nicht zurück in den E Modus.

Sobald die Temperatur erreicht ist, je nach Fahrweise, Stecke usw. kannst du wieder in den E Modus gehen.
 
@MrCooooper , I have the same with my FL model from 07-2024. After a software update begin September I have seen it about 10 times. I have sent last week an email to my garage with the same question(S). Unfortunately haven't received a reaction.

@philimi , for me it's randomly. It happens also when I drive with Travel Assist normal speed, about 100 km/h, for at least 5 - 10 minutes.
 
@MrCooooper, I received an email from the garage to make an appointment to read the diagnostics. The garage's schedule is very busy. It will be begin in 2026.
 
Das Thema geht so in die Richtung, welches ich auch habe und unter dem Thread E-Modus wechselt nicht in Hybridmodus behandelt habe. Bin Mal gespannt was die Werkstatt wirklich sagt. Ich habe auch zu dem Thema einen Termin am 5.1.2026. Früher gab es auch keinen Termin.
 
Ich vermute, dass das alles einzig allein mit dem Softwarestand zusammenhängt. Mein VFL befindet sich nach dem Starten generell im E-Modus, und behält diesen auch auf "Teufel komm raus" bei, bis der Akku auf 1% abgesunken ist. Nur beim vollen Beschleunigen mit Kickdown bis zum Bodenblech schaltet er den Verbrenner dazu und natürlich bei den besagten 1% Akku. Dann lädt der Verbrenner den Akku wieder bis zu etwa 10-12% auf, und danach fährt er vorerst einmal wieder nur noch rein elektrisch, bis halt erneut nur noch 1% Akku vorhanden ist. Dann geht es wieder von vorne los.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top