Try this:
1. Switch to guest
2. Ignition off/on
3. Set guest privacy to "Share location"
4. Press and hold the infotainment power button for 10 seconds (reset)
5. Set guest privacy to "Share location"
6. Press and hold the infotainment power button for 10 seconds (reset)
7. Lock the vehicle for 5 minutes
8. Unlock the vehicle
9. Set guest privacy to "Share location"
10. Drive off or wait briefly until the globe icon turns white
11. Switch to main user

Seems to have worked for some.
 
Hey @Milan vielen Dank für den Tipp.
Zwischenzeitlich hat sich die Werkstatt gemeldet und das aus der Ferne wieder deaktiviert.

Aber falls jemand nochmals so einen Fall haben sollte, wäre das eine Möglichkeit es mal zu probieren!!
 
Hallo zusammen,
Hatte das selbe Problem der Leon wollte einfach nicht starten vor 2 Wochen .

Werkstatt meinte jetzt zu
Mir sie machen ein Software update gibt es Erfahrungen ob der Fehler danach behoben ist ?

Vielen Dank
 
As someone affected, I have to tell you it depends; it would be helpful to know what engine you have here....

By software update, they probably mean an update of the control units, at least that was the case for me. I also had a 12V battery replaced.

I can tell you that didn’t help me, and after a little more than half a year I had to be towed again.

Now, after the second time, a control unit was replaced for me. Whether that has completely fixed the issue, I can’t tell you yet, as it was only a few weeks ago.

Feel free to post some more information about your vehicle here so that someone can give you a more precise answer!

Best regards and welcome to our Forum!!
 
Wurde bei mir auch gemacht, seitdem ist es nicht mehr passiert. Ich bin jedoch der Meinung jedes Update was Cupra macht, behebt evtl. dein Problem und bringt dir 3 neue. Seitdem ich Cupra fahre habe ich gelernt teure Kompromisse einzugehen. Für das Geld eine Frechheit. Gilt für Hard und Software. Wünsche dir viel Glück, dass es evtl. anders ist.
 
Servus Leute!

habe mal wieder den Leon ST beim Händler abgegeben wegen diverser Elektronik Problemchen. Darauf wollte ich jetzt nicht eingehen, meine Post sind ja auch hier in dem Thema zu lesen.

Jedoch gibt es seit kurzem ein neues Baseline Update für den Cupra Leon ST. Also jeder der Problemchen in der Elektronik hat (das sind ja bekanntlich viele) einfach mal beim Händler fragen.

Schönen Abend!
 
@David1897 , is dat the PV4 update to version 2768, which is mentioned on few other threads?
 
Hi,

to be honest i don‘t know. i only know that it’s new and will fix a lot o issues (or it will try to fix). On wednesday i will ask the Cupra partner if they can name the baseline Update and i try to let you know.
 
Es wird schon das 2768 sein, aber was man so liest, werden die einen Probleme behoben und neue treten auf. Es ist wie beim VFL, wer keine argen Probleme hat, fährt mit der alten Software am Ende besser.
 
@ekm , mostly the people which has issue(s) are reacting. May be a poll can indicate the ratio.
 
Yes, it was this update. Everything went through fine, the car was at the dealer for 2 days. So far, Kessy is more reliable but everything else is anything but truly reliable (I had major problems here) and the flickering has not occurred since. However, something new has appeared! The car tries to install the onboard Manual* every time, but this always fails. It’s not a big deal for now; the dealer will probably have to fix it next time.

I really don’t understand why they keep releasing cars like this. It’s a mystery to me why, especially with software stuff, they don’t check at the end whether everything was installed correctly. It’s enough to make you cry!

My charging cradle was replaced because after a previous update it only charged sporadically, and I got a new boot cover because mine was just hanging loosely.

Does anyone perhaps know if the onboard Manual* issue can be fixed by oneself?

Bus rest and hard reset didn’t help.

Regards!
 
@David1897, it's a known issue that the owners Manual* update is failing. The same version is already installed, maybe that is the problem. Ignore that message.
 
Unfortunately, the error with the onboard Manual* will not be fixed. Here is the statement from cupradigital, although the part about the test is nonsense:

Please

According to the case details, your vehicle was updated to software version 2768 during a workshop visit. Upon our review, no ORU campaign (Over-the-air Remote Update) was assigned to the relevant VIN; the update was carried out manually by the workshop.

Furthermore, the installed version is a non-standard build, identifiable by the suffix "TEST"

Currently, no corrective measure is available, as downgrading to a previous software version is not supported.
 
Soll das ein Scherz sein, sorry aber absoluter Drecksladen ist Cupra.

Es geht mir gerade nicht um diese Meldung sondern un den Umgang am Kunden. Da wird so viel halbfertige :poop: auf den Markt geschmissen und der Kunde und die Werkstätten können das ausbaden.

Habe ich kein Verständnis für.
 
Ich würde sagen: Seitens Cupra ist das eine Meisterleistung der Vertriebsarbeit. Das Ziel, den Kunden zu vertreiben, ist zu 100% gelungen!!! Sarkasmusmodus aus...
 
Ich frage mich, ob die untereinander miteinander kommunizieren 😃 Cupra sagt Update bei Problemen mit der Ambientebeleuchtung ohne Einschränkung zu installieren und Cupra Digital dann so. Mein Ticket ist weiterhin offen und ist bei Cupra Digital erneut eskaliert worden. Seitens Cupra TSC gab es noch keine Antwort.

Die Fehlermeldung hat sich bei mir heute Abend geändert:

20251212_174346.jpg
 
Naja mal sehen was da noch kommt, ich sag mal so. Zumindest scheint es so, als wären die anderen Probleme weg oder besser geworden. Bis auf den Travel Assist ist es soweit echt besser geworden. Der Meldet sich auch noch immer bei 8 Grad, trocken ohne Nebel das er die ersten 20 Minuten nicht laufen will.

So armselig.
 
Du meinst das Thema mit "Sicht nach vorne" beim morgendlichen Start, obwohl die Scheibe nicht beschlagen ist? Das hatte ich vorm Update immer bei knapp 0°C. Ist nach dem Update wesentlich weniger geworden.

Gab es nicht auch mal bei den Lenkrädern das Problem, wo man es unten auf 6 Uhr Position mal kräftig zusammendrücken soll?
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top