Tygulav
Stammuser ★★
The 1.5 TSI in the PHEV, to my knowledge, does not have an alternator, so the 12V battery is actually not charged by the combustion engine. The 12V must be charged by the HV battery. A "new" theory from Cupra is that you should unplug the charging cable promptly after the charging process, otherwise the 12V battery will be drained. At least that's what was stated by the Cupra workshop in another Forum. I also had that "problem" with returning for a while (2x for a few days). As soon as the combustion engine started, it briefly displayed "longer engine run needed." I could only enter eMode by restarting the car. Apparently, this has to do with the OPF that quickly clogs up with mostly short uses in the PHEV. I then drove on the highway, and then it was quiet again for a few weeks, and the vehicle switched back and forth between Hybrid and eMode without problems.It seems that the 12V battery is only sufficiently charged when the combustion engine is used regularly. Pure driving and charging in E-mode apparently isn't enough. At least that's my assumption. I also had my issues with returning to E-mode, even though the HV battery was more or less full and the V-Max was far from being reached (30 km/h). Whether and how the 12V battery is also charged directly during the HV charging process by the wallbox??? The 12V battery is located, as already described, under the loading area, and there is an emergency release for the charging flap under the hood.
Last edited: