Cupra Terramar refuses to start

CTerramar2026

War schon mal da
Hello Cupra community,
My Cupra sometimes just won't start..
Last example yesterday at the gas station.... I start, automatic in D, give it gas to start moving and the automatic shifts to P and the handbrake activates.
Only after many more attempts was I able to get away in reverse (on the 3rd attempt).
I was at the workshop today, the problem is now known multiple times, but there is no proposed solution.
Does anyone have the same or similar problems? And possibly has information that could help!? The car is 6 months old.
Thank you!
 
I haven't heard that yet. Which engine variant do you have? Is Auto Hold active?
 
Hello
I wasn't familiar with the Auto Hold function, but it's not active.
Only that the brake caliper still holds for 1-2 seconds when switching from brake to gas.
Petrol 2.0 TSI with 265 hp, which from my perspective suggests there might be issues with some sensors.
The workshop also vaguely expresses this.
 
Last edited:
...in the other Forum, a "lighter" woman complained about similar behavior; for me, it was the TÜV inspector who leaned a bit out of the window to drive onto the lift. He also anchored and hit "P" when I leaned forward a bit while parking to get a better view of a flower pot and lifted my backside a little ;). Therefore, I would suspect that the seat recognition is not functioning properly for you.
 
  • Like
Reactions: ekm
Hello,
I am small and petite, which is why the seat recognition doesn't always detect me when I am not buckled in while getting in or out. A slight turn or lifting my bottom a bit is enough. My Leon engages the parking brake quite firmly.
That's why I always buckle up right away.
Maybe it's like Bean already mentioned, your seat recognition. Were you sitting or buckled in?
 
Last edited:
Hello Cuprabea
I tried it again today, whether with or without a seatbelt.... Even when I lift my butt completely off the seat when starting..... the car drives 🤷
I still believe the main problem is the ultrasonic sensors 🤔
 
It's a shame that it's not due to a small issue. I hope your workshop finds the error quickly. Keep us updated.
 
  • Like
Reactions: ekm
But do the ultrasonic sensors actually trigger the transmission position P? I have already experienced several braking incidents while reversing out. But there hasn't been an automatic P so far.

Hopefully, they find the error. Important: start documenting everything, when the car was where + how long it was in the workshop, what was checked. Also, try to have regular video documentation of the car's behavior in different situations
 
  • Like
Reactions: ekm
I have a tight exit with a hedge... If I get too close, the braking and shifting to P has already happened a few times. My workshop has already advised me to document it on video, etc. Thank you. I will definitely report how it goes from here or if an error is found. Until then, safe driving everyone.
 
t checking that properly.

I don
 
  • Like
Reactions: ekm

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top