DIY Accessories

Milan

Community-Customizer
Supporter
Germany
Hello everyone,

you can buy many things, but not everything. Somewhere on the Cupra website there is the saying "We believe that if we can dream it, we can create it." and in this spirit I want to create a little corner here for all creatives and tinkerers who like to "fine-tune" their Cupra or everything around it. I hope there are many others here who enjoy experimenting and want to share their projects and experiences.

In the Leon subforum, I have already leaked a little that I am currently trying to make Cupra shopping chips for myself. Etched and patinated from solid copper material. I have never done either before, so these are my first attempts with this new technique. The third prototype has just been finished, which I am already quite happy with:

PXL_20250525_224619897.PORTRAIT.ORIGINAL.jpg

The next project is already planned in the form of a custom-made garage door opener for a compartment in the centre console. I have already done this for my last Golf and Cupra as well
1748214205843.png


There is also plenty of experience from the past here: the 3D-printed part is made from PETG and not PLA, the aluminium button is already ready, and the whole thing is either covered with Dinamica/Alcantara or wrapped in carbon/gunmetal metallic.
 
Cool ideas! What do you do to prevent the copper coins from turning green?
 
The coins are treated with Zapon lacquer, but due to use, it probably won't last long. Otherwise, keeping them dry and polishing them occasionally should be enough. Everything else will be revealed over time :)
 
Today, the first and also the last small series of 6 coins was produced (and tested with the Edeka shopping cart).

R62_7220-Verbessert-RR.jpg

I would raffle two coins for shipping costs (€1.80 within Germany). Anyone who wants to participate can send me a PM by Tuesday, 27.05. at 18:00.
@ST4NIf you would like to have one, feel free to let me know, you were the first to ask and do not have to participate in the raffle :)
 
Last edited:
Wow. Das Endergebnis ist echt SAHNE!
 
@Milan
Hast eine Nachricht.
Vielen Dank!
 
Von mir auch!!! Kam gestern nicht mehr an meinen Rechner wegen einer Dienstreise...

LG Joachim
 
I think the individual pieces are really well done. However, since I often forget my shopping tokens in the car, I prefer to skip participation.

But it's a great thing and currently unique if you own this chip. A real eye-catcher (y)

For a model as a shopping cart release like in the following example/sample, I would be in:

31809562_Einkaufswagen_ChipSchlusselanhaenger_SteelCart_silber.jpg
 
Last edited:
Sieht schonmal gut aus. Du steckst dann da eine Funkfernbedienung rein?
 
Carbon hast du aber an dieser stelle sonst nirgendwo im auto, daher m.M. eher was anderes, was farblich, optisch besser in das Bild passt
 
Noch... Ich bin grade auf der Suche nach schönen Schaltwippenverlängerungen aus Carbon/Carbonoptik... wobei ich eher Verbreiterungen brauche, da ich mit den Fingen nicht ganz sauber bis an die Wippen komme :confused:

Aber Carbon geht notfalls immer, die Folie die ich dafür habe ist super dankbar zum verkleben.. (auch wenn dann das Cupra-Logo weg ist, aber darum kümmert sich dann der Folienplotter.... a.k.a. "den Rest macht der Maler")

PXL_20250529_194405242.PORTRAIT.ORIGINAL.jpg
 
Der WAAAAAAAHNSINNNN...!

PS: die Münze kam gestern, schaut auch als Prototyp seeeehr geil aus. Danke nochmal!
 
Die Kaugummi Box für die Mittelkonsole ist mega! Wenn du auf Bestellung fertigst, bin ich dabei!
PS: der Chip wird sicher auch bei mir schon angekommen sein, da ich allerdings gerade in Japan verweile, gibt es das Feedback erst in einer Woche. ☺️
 
Wenn du auch die Upgrade-Variante des Einsatzes hast mach ich das. Ich kann allerdings im Moment nur mit PLA-Kunststoff drucken, das hat die leidige Eigenschaft ab ca. 40-45° "weich" zu werden und sich über die Zeit zu verformen. Das sollte bei der Box konstruktionsbedingt nicht viel ausmachen, aber wissen tue ich das auch erst nach dem Sommer :geek:

Ich bekomme im Laufe des Juli eine neue Maschine mit der auch PETG und ABS möglich sind, die sind für solche Szenarien besser geeignet, falls Du warten kannst. Ansonsten kann ich Dir auch die Druck-Dateien schicken und du lässt es bei einer beliebigen Internet-Druckerei fertigen. Die Dateien bekommst Du kostenlos.

Bei mir würde die Box+Deckel dann 10€ (PLA) bzw. 15€ (PETG/ABS) kosten, soweit möglich kann der Deckel auch individuell gestaltet werden.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top