Do the wheels fit on Cupra Leon ST VZ 333 model year 2026?

Kirac16

War schon mal da
Hello,

do the wheels and tires fit on the Cupra Leon ST VZ 333 model year 2026? The original specification is indeed 8x19 ET 49 and not ET 48. Is there an official tolerance? Or do I need to do something additional?
Borbet W 8x19 ET48 5x112, 235/35/ZR19

Please no speculation, just expert information.

Thank you in advance and best regards,
Kirac16
 
Für die Borbet gibt es eine ABE und wenn das Fahrzeug dort mit der Reifengröße ohne Auflagen gelistet ist, dann passt es auch.

Die Felge hatte ich bei meinem auch schon mal konfiguriert, aber ob dann 235er oder vielleicht nur 225er Reifen weiß ich nicht mehr. Die Frage ist auch ob Cupra oder Akebobo Bremse.
 
I agree @ekm It's important which brake you have. If I looked correctly:

The approval in the ABE of the Borbet W 8x19 ET48:
Approval EB1: Not permitted on vehicle versions equipped with the following brake system: Axle 1: 4-piston fixed caliper designation Brembo A5440101 with ventilated and perforated disc Ø370x32 mm.

This is the crucial point for your VZ 333.

Without Brembo (standard Cupra performance brake or Akebono): The Borbet W ET48 is permitted according to the ABE — no registration required, carrying the ABE is sufficient.

With optional Brembo (Ø370mm): The wheel is not permitted according to ABE approval EB1 — either a different wheel is needed or a single approval according to §19(2) StVZO with clearance testing.

Borbet's own configurator (primary source)

The Borbet 3D configurator at borbet.de/felgen-konfigurator allows you to enter vehicle data and configure wheels directly with ABE, ECE or certificates.

There you can enter your Cupra Leon and select the W 8x19 ET48 — the corresponding ABE document is then directly linked

The ABE certificate of the Borbet W consists of several annexes (one per vehicle manufacturer group). You need the annex that covers Seat / Cupra and must check whether the Cupra Leon ST (facelift KL, model year 2025/2026) with the 333-PS engine is explicitly listed in the scope of use — and under what conditions (especially brakes).

Contact Borbet directly
👉 https://www.borbet.de → Contact
Phone: +49 (0) 2984 89-0
E-Mail: info@borbet.de
Simply state the wheel type (W), size (8x19 ET48 5x112), and vehicle (Cupra Leon ST VZ 333, MY 2026) — they will send the PDF free of charge.

Alternative:

certificates.reifen.com

The platform certificates.reifen.com hosts many Borbet certificates as direct PDF downloads. You can search for the KBA number of the Borbet W there. The KBA number is embossed on the wheel itself — usually near the valve hole.
 
Last edited:
Die Angaben in der CoC gelten nur für freigegebene Felgen des Fahrzeughersteller, hier also CUPRA/SEAT, sind für Zubehörfelgen vollkommen irrelevant.
Für Zubehörfelgen sind ausschließlich deren ABE/Gutachten incl. ggf. vorgegebener Auflagen maßgebend.

Die Felgenkonifiguratoren der Onlineanbieter sind aber diesbezüglich recht gut, vorrausgesetzt, man setzt die richtigen Häkchen wie mitb ABE/Gurachten.
Neben den äußeren Abmessungen (Achtung Bremsen!) gibt es auch noch so profane Dinge wie Traglast, etc.
 
@JoergFB58 ich bin momentan auch auf der Suche nach einem weiteren Felgensatz und das größte Problem stellt bei mir die Akebono-Bremsanlage dar. Dadurch kommen extrem viele Felgen leider nicht in Frage.

Hier auf dieser Seite sind auch die Auflagen übersichtlich dargestellt und es wird auch auf die mögliche (In-)Kompatibilität mit Bremsanlagen in bestimmter Größe hingewiesen.
 
Hello everyone,
I'm attaching my question here ;)
Since I'm on the lookout for wheels for my VZ, I stumbled upon an offer for a set of Cupra Hailstorm wheels, buuuut:

- Does anyone know the weight of the Hailstorm wheels? They are supposedly a forged wheel?

- The offer lists the wheels with ET40 and it's also stamped. In other offers, the Hailstorm has ET43?

- Since I'm only getting my VZ in October, I obviously don't have a CoC at hand, can I drive the 8x19 ET40 like this?
I didn't order an Extreme and no Akebono brake.

Thanks in advance!
 
As far as I know, there are wheels with different offsets while being the same size.
 
I would like to claim that the 40s are from the Extreme with the Akebono brakes.
 
Yes, I think so too. I once made an inquiry directly to Cupra. The main problem would of course be the approval/registration, as the size will probably not be in the COC.
 
The Leon Extreme with Akebono has an ET of 43.
 
  • Like
Reactions: ekm
For an OEM 19", it's not such a bad weight. But the OEM Cupra wheels are also not cheap; you can find something in the accessory shop for the same money that weighs +1kg less per wheel.
 
When it comes to weight, the Tomason TN29 is the winner (approximately 8.6kg weighed myself) (according to wheel weights at Felgenoutlet, closely followed by some Motec and other Tomason TN2x) and the whole set costs around €1000, for that you probably get exactly one Cupra wheel.

The dimensions of the TN29 are 8.5 inches in width and ET45.
 
  • Like
Reactions: ekm
However, there are only a few accessory wheels that allow 235 tires with ABE (without modifications). For most, 225 tires are recommended, and 235 tires are only allowed with "Caution: bodywork modifications" or similar. Unfortunately, this also applies to the mentioned TN29.
 
The TN29s are actually still my favorite, but I'm still debating whether to take the easy route with the 225s. I think the 235 tire has more advantages (looks, grip, rim protection), and the registration shouldn't be a big hurdle now, right? Does anyone have a picture of the mentioned tab/screws in the wheel arch that might need to be modified?
 
Just do a single acceptance, nothing needs to be processed.
I've been driving it for several thousand kilometers now, and nothing is rubbing. (The TÜV is anyway in winter with the stock wheels, when it comes up in 2 years 😇)
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top