Door column on the facelift estate

coopra

Forenfan ★★★
I drive the Leon ST, and whenever I approach the car from a slight angle at the back, I keep noticing that the lower edge of the rear doors seems to "stick out" a bit. Overall, the edge looks uneven to me: wider at the top, then fairly flush with the body at the level of the fender, but further down in the corner it seems to be "further away" again.

Pictures attached for clarification.

On both sides at the rear doors.

Does it look the same for you?
Could water or snow not get in there..?
 

Attachments

  • 20250318_160520.jpg
    20250318_160520.jpg
    2.6 MB · Views: 58
  • 20250318_162258.jpg
    20250318_162258.jpg
    2 MB · Views: 59
Looks similar to mine.
20250318_194931.jpg
 
Last edited:
In einer Großserienproduktion gibt es nun mal Toreleranzmaße, mal nach oben, mal nach unten. Wenn man Glück hat passt es halt super und die Spaltmaße sind ideal gleich, aber ohne geht es nicht. Wärmedehnung, etc. Je nach Wagenfarbe/Lichteinfall sieht man diese natürlich um so mehr. Ist halt der Nachteil bei hellen Farben oder gar weiß.
Abdichtung geschieht wie schon geschrieben über die Dichtungen. Alles andere muss genug Platz haben, um auch wieder raus-, abfließen zu können. Sonst gammelt es.
Daher lieber ein großer Spalt und gute Hinterlüftung, als zu knapp und evtl. sogar Probleme wenn es schabt.

Sicher kann man auch eine halb Stunde an der Türeinstellung herumfummeln, aber das kostet. Dann sind wir aber auch in einem anderen Preisegment, was hier kaum einer bezahlen möchte/kann :cool: :ROFLMAO:
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top