Engine temperature display

balfa

War schon mal da
Hello!

I have recently been driving a Cupra Formentor, year 2021, 150 PS TSI DSG.
I am unable to find any display of the engine temperature/coolant temperature anywhere. No matter which setting I choose on the display, this temperature does not seem to appear anywhere. Please could you help me. Thanks!!
 
Hallo @balfa und Willkommen im Forum.

Die Temperaturen werden im linken Teil des Cockpits angezeigt. Hast du die markierten Tasten benutzt?
1761334542917.png
 
Exakt. Das Video zuvor beschreibt es ganz gut.
 
Hallo liebe Cupra-Experten!
Die Temperaturanzeige im linken Teil des Cockpits funktioniert mittlerweile wunderbar.
Zu den Anzeigen im Cockpit möchte ich eine weitere Frage stellen: Wie schaffe ich es, dass die erlaubte Geschwindigkeits im Cockpit angezeigt wird? Im Infotainment wird die erlaubte Geschwindigkeit im Navigationssystem angezeigt, nicht aber m Cockpit. Ich habe alle Views getestet, schaffe es aber nicht. Oder kann das mein Cupra nicht? Vielen Dank für eurer weitere Hilfe (Das Bild stammt aus dem Beitrag von Milan - weiter oben ;-) )
1768841031678.png
 
@balfa, under the car setting the should be a menu for road sign, see link below for more Information.
 
Diese Einstellmöglichkeit habe ich nicht als Assistent, sondern nur im Navigationssystem selbst. Dort wird das Verkehrszeichen angezeigt, nicht aber im Cockpit.
 
@balfa , it depends on your car. Which one are you driving?
 
I had for a month a Leon ST pre-facelift model where the sign menu was available.
 
Irgendwie muss das ja klappen, denn im Cockpit wird mir immer mal wieder z.B. eine Geschwindigkeitswarnung oder eine Warnung für einen nahenden Kreisverkehr angezeigt.
 
Hello everyone, I also have a question about the water temperature when it’s cold. My Formentor VZ Baj 2024 rises to about 90 degrees (water) within approximately 2 km, which isn’t a problem. I just wanted to know if an auxiliary heater helps with this or why it heats up so quickly. Thanks for the info.
 
When warming up after starting, this usually only runs through a small circuit so that it heats up quickly.
 
Okay, I've heard about that already, but I didn't think it would happen so quickly. Thanks for the info and have a nice Easter.
 
Hello everyone, I have a question about the water temperature when it’s cold. My Formentor VZ model year 2024 rises to about 90 degrees (water temperature) within roughly 2 km, which isn’t a problem. I just wanted to know if an auxiliary heater helps with this or why it heats up so quickly. Thanks for the info.
The water temperature gauge has a plateau function. It’s been in every VAG car since the 1990s. It shows 90° from an actual water temperature of about 70°. You can easily log this with VCDS.

The idea behind this is probably to prevent the gauge from constantly fluctuating back and forth.
 
Außerdem hab ich gelesen, dass im VZ der eigentliche Krümmer, also wo die heißen Abgase abgeleitet werden, im Motorblock sitzt (nicht extern angeflanscht) und somit das Kühlwasser schneller aufheizt.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click one of these links and make a purchase through it, we receive a commission from the relevant online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top