Error drive during recuperation set to "Strong"

ka113

Ist öfter hier
Hello everyone,

today was finally the day for me, and I was able to pick up my car. Unfortunately, I also encountered the first error.

After I set the regeneration to Strong and switched the mode to Hybrid, I immediately received the error "Drive system error" as soon as the petrol engine started. I then set the regeneration back to automatic and restarted the vehicle. The error was gone and did not occur again.

I have no idea if there is a connection.
 
Moin, mein Verkäufer meinte zu mir, dass ich mich nicht wundern soll, wenn das Auto am Anfang mal noch den ein oder anderen Fehler ausspuckt, sollte aber in 1-2 Tagen nicht wieder auftreten. Mein Tipp, beobachte und wenn´s nicht besser wird, dann mal beim Freundlichen vorbei schauen.
Ich hatte Tatsächlich am ersten Tag den Fehler, Ausfall aller Assistenzsysteme. Aber seit dem einem Mal nicht mehr aufgetreten.
Mein Verkäufer meinte es liegt wohl daran, dass die Autos nach Produktion nicht die Möglichkeit hatten sich vom System erstmal neu einzustellen und es deswegen mal zu der ein oder anderen Fehlermeldung kommen kann.

LG
 
Danke, gut zu wissen!
 
@Ice-Mark
Das kann ich auch bestätigen.
Unsere Kunden berichten auch immer wieder, das es in den ersten Tagen, der ein oder andere Fehler auftreten und nach dem Neustart weg bleiben.
Was ich nur sehr schade im PKW Bereich finde, ist das die Steuergeräte beim Händler nicht auf den Neusten Softwarestand gebracht werden.
Ein bekannter der bei VW Servicetechniker ist sagte, nur bei Kundenreklamationen oder Fehler im Ausgangskurztest sollen die Stände aktualisiert werden.
Das finde ich schon sehr frech
 
Naja, die neue Software ist in diesen Fall meist nur Fehlerbehebung und nicht an neue Features gebunden. So lange die "alte" Software läuft, macht es daher schon Sinn alles auf dem Stand zu lassen. Einfach so die neue Version aufzuspielen könnte dann erst Fehler hervorrufen.

Zum TE, stell rugig mal wieder auf "stark" es sollte eigentlich nicht damit zusammenhängen. Sollte sich der Fehler doch in dem Zusammenhang wieder melden (was bisher noch nicht von irgendjemand hier bestätigt wurde), kannst du immer noch zurück stellen.
 
@ekm Werde ich morgen mal testen und berichten!
 
Morning, I finally tested it now. It really was just a coincidence!
 
Today, after 4 weeks of operation, I also got this error. I still have to try switching the recuperation.
Recuperation on automatic, even multiple on and off does nothing! The dealer says I should leave the car with them, but there is no free loaner car!!! Is that normal? It's not my fault that the new car is acting up!

@Ice-Mark
I can confirm that as well.
Our customers also report time and again that in the first few days, one or another error occurs and disappears after a restart.
What I find very unfortunate in the passenger car sector is that the control units are not updated to the latest software version at the dealer.
A friend of mine who is a service technician at VW said that the versions should only be updated in case of customer complaints or errors in the initial short test.
I find that quite cheeky
Good that cars (still not) can fly!!!
 
Last edited:
Das ist schon eine wundersame Kiste! Über Nacht hat er sich selbst geheilt. Heute morgen meinte er, dass es OK wäre, wenn wir wieder elektrisch fahren. ACC funzte dann 2 Std. später auch wieder; ich bin ganz gerührt . Mal sehen was sich das Überraschungsei als nächstes einfallen lässt!🥹
 
Cupra

Software, the changes are completely unfounded.
I once had a nice car, the Formentor Hybrid. After various software problems, where it was often unclear whether it was me or the intervention of a crazy programmer causing errors. It was usually not entirely clear. Over time, a complete software update was supposedly carried out (who really knows for sure), and indeed some calm finally set in. Of course, I also learned from it, and the car and I understood each other better. The best approach was to get out, lock the car, and casually walk around the Cupra three times
However, by now an ugly fault has spread (see topic E-mode does not switch to hybrid mode). According to an expert after consulting Cupra, this is how it is supposed to be. I wonder who they had on the phone there.
What is clear now is that we as users are constantly and unexpectedly and without explanation bombarded with updates "like pigeon droppings". Used as guinea pigs and sent on a trip – now test away. How do I feel about that and how does it affect me?
I get nervous and annoyed. I hate surprises of this kind.
With every update, a particular fault always occurred. The set minimum radio volume always has to be reset. Recently, the volume is zero tone. Doesn’t matter anymore.
By the way, the car is still beautiful.

Regards, deCup's
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top