Error P2681 on Leon Cupra 280 (5F5)

Sam Lowry

War schon mal da
Hello dear readers,
my girlfriend occasionally gets the following error message:
P2681 "Engine coolant bypass valve control malfunction circuit/open circuit"
I clear the error, but after short trips it eventually comes back.

After searching for days, I would like to briefly share my impressions:
In a YouTube video, someone installs a new water pump and thinks the error is fixed (around €1,000 for Seat!). Nothing. The error is still there.
Then he shows a connector that is slightly corroded and replaces it, and everything is fine.
So all the hours of wrenching were for nothing, including removing the intake manifold and so on.

However, it is impossible to reach this connector from above. Does anyone know if you can access this connector (at the water pump) from underneath if you remove the underbody cover?

Then I had another idea:
The error could also come from the coolant level sensor or the coolant temperature sensor.

Does anyone have experience with this?

Thank you very much in advance for your efforts.
Kind regards
 

Attachments

  • steckerwapu.jpg
    steckerwapu.jpg
    262.6 KB · Views: 7

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top