Gray globe, once again

Ich habe zwar nicht das Update aber ich hatte vorgestern plötzlich auch die Meldung "Es sind neue Einstellungen für den Benutzer vorhanden" (oder so ähnlich). Da hat was nicht vernünftig synchronisiert -> tippe auch auf Serverprobleme
 
Nachdem ich nun auch 2 Tage die "graue" Weltkugel hatte, ist seit Update der im Bild dargestellten Inhalte, das Problem verschwunden.

Augenscheinlich hierfür verantwortlich ist das Update der Datenpakete.

1000024274.jpg
 
Welche Software hast du?
 
Sind die drei Updates Datenpakete 2.27.12 und In car Aktivierung und Store zuverlässig oder gibt es Problemmeldungen nach Installation?
 
@Shanty bisher hatte ich keine Probleme nach diesen 3 Updates.
 
  • Like
Reactions: ekm
Last edited:
  • Like
Reactions: ekm
Wenn du bei Cupra kein Update machen lassen hast, dürfte es noch 2650 sein (hab gerade schnell im Showroom geguckt), OTA gab es mWn für´s FL bisher nicht.
 
Ich habe nach dem großen Softwareupdate und auch den Updates der drei Systemupdates das Problem, dass mein User nicht synchronisiert wird.
Alle Einstellungen etc. sind aktuell weg.

Hat jemand dieses Phänomen auch gehabt? Und eine Lösung dafür?

Und das Digitale Boardbuch wird nicht installiert mit Fehler (ERR_01_028_TP). Installation abgebrochen...

Fehler seitens der Beleuchtung (flackerndes Ambientelicht, Fehler Rücklicht und Warmblinkleuchte an bei Schlüssel in der Nähe) sind bis jetzt nicht mehr aufgetaucht. Mal sehen.
 
Also Weltkugel ist weiß und da sich mein User nicht synchronisiert hat, habe ich mit Absprache meiner Werkstatt die Wiederherstellung der Werkseinstellungen angeklickt und mich nochmals aktiviert.
Fehler bleiben...

Und bei jedem Start meines Autos ist die Lenkradheizung an :rolleyes:
 
Strange. What does the workshop intend to do? Reinstallation? Is your user the main user? So after the factory reset with both keys....

If the setting is missing, that could be the case. Can't you turn off the option?
 
Last edited:
Falls es erst seit heute ist: Cupra Connect scheint down zu sein, vielleicht hat es etwas damit zu tun. Meine App lädt ins Unendliche und startet nicht. Hatte ich so bisher noch nie.
 
Bei mir auch und dann kommt die Info da Apo wird gewartet.
 

Attachments

  • Screenshot_20251115_142141_My CUPRA.jpg
    Screenshot_20251115_142141_My CUPRA.jpg
    124.7 KB · Views: 14
Scheint so, funktioniert wieder bestens.
 
Strange. What does the workshop intend to do? Reinstall? Is your user the main user? So after the factory reset with both keys....

If the setting can be missing, that could be the case. You can’t disable the option?
Morning,
I received feedback from the workshop over the weekend that they want to perform a hard reset of the control unit.

It should be done tomorrow, but today I got a call saying that apparently the major update is causing the error in some vehicles, and the user is no longer synchronising and the onboard Manual* cannot be installed.

A ticket has been opened with Cupra and it is apparently being worked on. The error is currently occurring more frequently, including on the Formentor.

Quite annoying when all settings are lost :rolleyes:


P.S. The heated steering wheel was my fault, I hadn’t disabled the option after the factory reset.
Never would have thought someone would need a heated steering wheel at 12°C and thus have it switch on automatically :unsure:
 
Okay. My Leon is online and the user is also synchronising. Only the board book does not install, even though the OTA app updates have arrived. Unfortunately, my appointment will take a little longer. It is only on 5 December.
 
I'm curious to see who will be the first to know a solution.

At my dealership, among others, the owner / workshop manager is affected; I think he'll be asking Cupra more often 😁.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top