Leon VZ 2.0 TSI (Fjord Blue)

Welcome! You have been invited by Gand-Alf to join our community. Please click here to register.

Milan

Community-Customizer
Supporter
Germany
Once Fjord Blue in wet 😆

R62_7222-Bearbeitet-Bearbeitet.jpg

The following accessories are installed/loaded:
- Boot rubber mat from Azuga
- Center console compartment of GAFAT (made a bit "softer" from the inside with fluffy cable harness tape)
- CUPRA umbrella from AHW (Here is a holder for under the parcel shelf made of Velcro)
- One Haufen Kleinkram as a self-proclaimed "brand whore" that I just couldn't get past

Since mine has to be completely redone with a new clear coat due to transport damage, the loading edge protection and other wrapping work are still pending
 
@Milan schönen Fahrzeug 🍻 (y)
Viel Spass damit.

Den kleinen Cupra-Kennzeicheaufkleber über dem D finde ich interessant. Ist der so beschaffbar oder ist das einfach nur im Bild nachbearbeitet?
 
Toll
 
@Milan , great licence plate :love:. In the Netherlands we can't have our own, you get the first in line.
 
@Milan hast du mal nen link zu den felgen?
 
Ich habe schon ein paar borbet gefunden, auf einer anderen Seite. Ich glaube bei den akebonos brauche ich mindestens 19"
 
@Shaun Be careful, not all 19-inch wheels fit the Akebono, or only with spacers.
 
@dantheman Is there an indicator or value I should pay attention to so that it fits without having to order them?
 
@Shaun

Unfortunately not, but I recommend you take a look at Felgenoutlet, for example.
There you can select all-round carefree and then easily check under Certificates / Requirements.
Example with the Borbet Y in 8x19 ET50:

1762239222095.png

Unfortunately, I can only speak for the Formentor; the wheels with Akebono in the dimension 8.5x19 with an ET between 38 and 43 fit there.
However, I believe it is somewhat different with the Leon.
 
For the Leon, the Akebonos are probably also ET43.
 
@Shaun

Diewe Predator

Take a look, these fit for example and even have Akebono specifically listed in the certificate. Dimension: 8x19 ET43
 
Danke
Viel Auswahl hatte ich nicht😅
 
Projekt für den Frühling: "TCR-Folierung"

PXL_20260209_125846814.MP.jpg
Die Linien des CUPRA-Logos und der Beschriftung werden in Grau-Metallic der Außenspiegel oder Schwarz ausgeführt.

Lasse mir mal von den örtlichen Folierern ein Angebot machen. Habe zwar damals™ schon Polo, Peugeot 206 und A3 selber mit ähnlichen Streifen/Mustern foliert aber mit dem Alter kommt die Erkenntnis, dass Profis doch manchmal ganz gute Arbeit machen und es das Geld Wert ist :D, auch wenn die Materialkosten beim selber machen im Bereich von mittleren zweistelligen Beträgen sind. Mal gespannt was die Spezialisten so aufrufen.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top