Park Sensors

Joel.1925

One-Post-Wonder
Hello everyone, I'm new to the group and hope for some tips.

A few weeks ago, I had my Formentor VZ completely wrapped. Before that, I had absolutely no problems with the parking assistants. Since the vehicle has been wrapped, the front sensors are going completely haywire. Every time I get the error message "Front parking assistance error & exit warning not available." In the meantime, the sensors have also been cut out, so they are unwrapped again. I have already been to the dealer for diagnostics, but no diagnosis could be obtained; the sensors are definitely not defective. So if the sensors are not defective and are free of any wrap, what could the problem be? Maybe someone here has had a similar experience. I'm slowly running out of ideas.

Regards, Joel
 
hello @Joel.1925 ,

I searched next door for "Parking Sensor Failure."

Possible causes:

  1. one or more sensors defective (your workshop rules this out)
  2. moisture in one or more sensors
  3. one or more sensors dirty (possibly still adhesive residues?)
  4. system limit trailer operation: some sensors/assistants deactivate during trailer operation
  5. system limit weather: some sensors/assistants intentionally deactivate in poor visibility, e.g., in spray/fog because the radar is restricted
  6. problem with trailer operation: in one case, the trailer contacts were wet, which led to error messages and failure of the sensors/assistants. You might want to clean/dry the contacts of the tow bar (if available). Otherwise, maybe also have a reboot of the control unit performed (disconnect the battery).
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top