Problems with the Cupra App on the Born

HJ.Feigl

War schon mal da
I received my Cupra Born 2024 77kWh last week. Everything works well except for the app. Unfortunately, I cannot connect to the Cupra Wallbox or to charging & payment with my Cupra app. I get the message "Something went wrong" and I should contact customer service. I was able to reach customer service easily, but they couldn't help either, so it was forwarded to the specialists. After two days, I received the message that I should probably wait for the next updates of the app; it will definitely work at some point... very strange. I am a software developer myself and would appreciate a precise error message. Has anyone else experienced this error, or had it?

Cupra Wallbox Connect Pro (Elli) connected with LAN access works fine when set up in the same network.

Cupra App - Plug & Charge does not work at the last step of registration, then the error message "Unfortunately, something went wrong"
- CUPRA Charging - select Wallbox (Cupra Charger) - scan QR code - then the error message "Unfortunately, something went wrong"

Does anyone have an idea?
 
Moin, zu erst einmal, welches Handy Betriebssystem benutzt du?
Hast du den Cupra Charger 1 oder 2?
Ist bei dir in der Cupra App denn auch deine Ladekarte* hinterlegt?
LG
 

Attachments

  • image.png
    image.png
    448.7 KB · Views: 12
Moin in die Runde, mein Handy Apple 12 mit aktuellen Betriebssystem 18.5.0 und den Cupra Wallbox Connect Pro (1)
Die App hat auch die Landkarte und Verbindung zum Fahrzeug. Nur die beschriebenen Probleme.
 

Attachments

  • IMG_5803.PNG
    IMG_5803.PNG
    140.4 KB · Views: 9
  • IMG_5800.PNG
    IMG_5800.PNG
    191.1 KB · Views: 8
  • IMG_5799.PNG
    IMG_5799.PNG
    89 KB · Views: 7
  • IMG_5798.PNG
    IMG_5798.PNG
    168.3 KB · Views: 8
Hm, Plug & Charge geht nämlich nur, wenn man auch einen Ladeplan ausgewählt hat, womit die das dann abrechnen können.
Bleibt dir scheinbar echt nur zu warten...
 
I have exactly the same problem with CUPRA Charging and the connection to the wallbox.
"CUPRA Charging - select wallbox (Cupra Charger) - scan QR code - then the error message 'Unfortunately, something went wrong'"
Even after manually entering the QR code, the same result.

Does anyone else perhaps have a suggestion?
 
Moin @GMK-2, wer hat dir die Wallbox installiert? Wurde die auch über das Tool richtig Installiert und Konfiguriert? Ohne das, wirst du die auch nicht in deiner App angezeigt bekommen. Welchen Charger hast du genau, 1 oder 2??

LG
 
Ich habe eine VW (Elli) Connect Pro die im heimischen LAN über das Web-Interface erreichbar ist.
Konfigurieren lässt sich da soweit ich sehen kann nichts.
 
Also ich kann dir nur sagen wie es bei meiner Elli 2 war, du hast einen Briefumschlag mit den Zugangsdaten um auf die Installationsoberfläche zu kommen, hier muss doch die Box eingerichtet werden, welche Ampere etc...
Die Box gibt hier ein eigenes Wlan aus, womit man sich verbinden muss, um auf die Oberfläche zu kommen.
Müsstest mal in deinen Unterlagen bzw in der Anleitung* nachsehen. Soweit ich weiß, war das auch bei den ersten Boxen so.
 
Habe es hinbekommen, ohne Cupra Charge oder Plug and Charge Abo.
Es müssen nur die beiden Geräte, Wallbox und Energiemanager miteinander bekannt gemacht werden.
Im KSEM unter EEBus die Wallbox eintragen und in der Wallbox unter Energiemanager das KSEM.
Dann leuchtet an der Wallbox die LED mit dem Häuschen grün. Jetzt funktioniert Überschussladen ohne weiteres zu tun, einfach das Auto mit der Wallbox verbinden und hoffen das die Sonne scheint.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top