Squeaking and non-functioning power steering | Leon Facelift 2025

y8nn8ck

Ist öfter hier
Supporter
Hello everyone,

with my Cupra Leon Facelift, first registration April 2025, and now approaching 30,000 km, I’ve been experiencing the following issues occasionally over the past few weeks (not continuously):

- The steering wheel squeaks extremely with minimal movements
- The assistance from the electro-mechanical power steering occasionally completely fails or varies drastically while steering in a curve
- Both problems always occur together and disappear simultaneously after a vehicle restart

The squeaking can be heard both when stationary and while driving. At first, I thought I had a bird sitting under the bonnet, but the noise actually comes from minimal movements of the steering wheel. I’ve uploaded a video to YouTube for reference.

Sometimes the power steering assistance completely fails, making it extremely hard to turn the steering wheel. There are also instances where the assistance level changes unpredictably during cornering, so that I can’t steer properly at first, and only once I apply more force does the power steering eventually kick in again, allowing me to turn the steering wheel easily once more. It feels a bit like the lane-keeping assist is interfering, but I’ve explicitly disabled this feature to rule it out! The Travel Assist is also not active!

The issue is quite difficult to describe, as it usually doesn’t appear immediately after starting the engine, but rather after a few kilometres. After a vehicle restart (locking the vehicle and waiting 5 minutes), both the squeaking and the jerking of the power steering are gone again.

This problem first occurred after the PV4 update.

If anyone else has experienced similar issues, I’d be grateful for any advice :-).

 
Last edited:
@y8nn8ck , I haven’t those issues after the PV4 update.
 
hallo @y8nn8ck Du hast aber auch ein Glück mit Deiner Elektronik .. :(

Habe gerade nebenan geschaut, ob zu Problemen mit der Servo etwas berichtet wird. Nein leider nicht.

Indirekt vlt. etwas, das einen Hybrid betreffen könnte 🤷‍♂️ [Spannungsversorgung systemrelevanter Bauteile, z.B. Servo, wenn der Benzinmotor beim "Segeln" ausgeht. Dazu muß ich zwei Dinge anmerken: "Segeln" beim ROC (100% fossil) kann nur heißen: Freilauf mit Motorleerlauf. Und zweitens: "Segeln" bei VW ist "Freilauf-Motor aus". Welches "Segeln" gemeint war, habe ich nicht nachgelesen denn zu 90% ist das erste "Segeln" gemeint.] Jedenfalls wurde in dem Anleser erwähnt, dass beim "Segeln" die Spannungsversorgung von der 48 V Batterie übernommen wird. 48 V - deshalb dachte ich an einen Hybrid. Aber der Sportstourer ist doch kein Hybrid, oder ? 🤷‍♂️

So oder so: bei Ausfall der Servolenkung würde ich die Fachwerkstatt aufsuchen.

p.s.: zum Quietschen (oder ist es doch eher ein Knarzen ?) vlt. noch ein Vorschlag zum Nachlesen:


und noch ein Nachtrag: sehe gerade, mein ROC hat mal ein sw- update für das Lenkgetriebe erhalten - obwohl mir die Symptome, die Du beschreibst, nicht aufgefallen sind.
 
Last edited:

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top