Hello everyone
I wasn't quite sure where to post my topic, but since I believe it's an electronic issue, I'll ask my question here...
I have a Cupra Born 58, first registered in June 2022.
Before I leave for work in the morning, I always turn on the parking heater in winter, and the car heats up as it should. However, after about 10 minutes of driving, cold air starts blowing out from the footwell.... It takes about 2 minutes for the air to warm up again. When the cold air is blowing, it doesn't matter how warm I've set it.... Even if I set the temperature to HIGH and turn AUTO all the way up (level 3), it still blows cold air. I've also tried manually setting the ventilation to maximum or turning on "Warm Feet" in the settings.... No matter what I try, when the problem occurs, it blows cold air for a few minutes.
I've already taken my car to the dealership several times, and they have been in constant contact with the Cupra headquarters. After several software updates were made and no one still knew why the error was occurring, the factory said that it wasn't a software issue, but that the air turbulence in the footwell leads to a heat buildup at the temperature sensor located down there, which is why cold air is blown down. And since it is not a hardware or software problem, but simply arises from the geometry of the car, no solution for my problem is being worked on anymore...

Putting aside the fact that such an error could easily be fixed by adjusting the car's heating control (there are seemingly 1,000 sensors installed in such new cars), and that I am quite disappointed with this kind of "service" and "customer support" that Cupra is showing in this case, I wanted to ask if this problem is really so well-known and simply tolerated, or if my Cupra is just a black sheep...
The problem only occurs at cold temperatures (below about +5°C, when the car needs to heat more).
Best regards, Patrick
I wasn't quite sure where to post my topic, but since I believe it's an electronic issue, I'll ask my question here...
I have a Cupra Born 58, first registered in June 2022.
Before I leave for work in the morning, I always turn on the parking heater in winter, and the car heats up as it should. However, after about 10 minutes of driving, cold air starts blowing out from the footwell.... It takes about 2 minutes for the air to warm up again. When the cold air is blowing, it doesn't matter how warm I've set it.... Even if I set the temperature to HIGH and turn AUTO all the way up (level 3), it still blows cold air. I've also tried manually setting the ventilation to maximum or turning on "Warm Feet" in the settings.... No matter what I try, when the problem occurs, it blows cold air for a few minutes.
I've already taken my car to the dealership several times, and they have been in constant contact with the Cupra headquarters. After several software updates were made and no one still knew why the error was occurring, the factory said that it wasn't a software issue, but that the air turbulence in the footwell leads to a heat buildup at the temperature sensor located down there, which is why cold air is blown down. And since it is not a hardware or software problem, but simply arises from the geometry of the car, no solution for my problem is being worked on anymore...
Putting aside the fact that such an error could easily be fixed by adjusting the car's heating control (there are seemingly 1,000 sensors installed in such new cars), and that I am quite disappointed with this kind of "service" and "customer support" that Cupra is showing in this case, I wanted to ask if this problem is really so well-known and simply tolerated, or if my Cupra is just a black sheep...
The problem only occurs at cold temperatures (below about +5°C, when the car needs to heat more).
Best regards, Patrick