Update News

So, für all die es interessiert....
Wieder ein neues Update, in dem angeblich nun die Ladegeschwindikeit angezeigt wird...
Falls ich weitere Updates bekomme oder bemerke, melde ich mich hier wieder 🤭

Ah eines noch, im Auto wurde bei mir am Dienstag die Park & Pay App geupdatet, vielleicht sind nun auch mehr Parkplätze endlich mal mit dabei, konnte ich aber noch nicht ausprobieren....🤷‍♂️
 

Attachments

  • IMG_6321.jpg
    IMG_6321.jpg
    196 KB · Views: 49
Thanks for the info!!
 
Nope, but it could be due to the pre-facelift and facelift 🤷‍♂️
You drive the pre-facelift, but I would have to check again after work today.
 
The 1988 is only for VFL. The FL has 2××× software 😉
 
But no matter which Cupra you have, feel free to post about modifications here!!
 
In the last few pages, the app was often discussed... Somewhere in the Forum, there was also talk about comparisons of the hardware identifiers, but not here in the thread 😅

I think it fits best here - I went through photos of my Cupra again over the weekend and noticed this:

Cupra Leon ST facelift with navigation, Edge, Drive Assistant package, and Sennheiser

Upon delivery, I had these details in the MMI:
Part number device: 5FA035816
Hardware: H10
Software. 2460

At that point, I had all the errors that existed: starting issues, transmission defect error message, check rear lights, key not in vehicle, airbag error (occurred once), various assistants not available (the latter possibly frost-dependent?)... I just didn't have the ambient light flickering 😅

After the major software update in April, then this:
Part number device: 5FA035816A
Hardware: H10
Software: 2565

Allegedly, there were only updates for control units or one big update, which took a few days to install due to size-related loading/transmission issues..
I don't know if something was actually swapped in the hardware or if the new software brought the additional hardware identifier - elsewhere in the forum, "B" was also seen.

I no longer had the supposed transmission damage 🙃 and general starting issues did not occur again, but I always waited for the "boot process" of the infotainment after turning on the ignition.
Errors regarding rear lights and key persisted.
The airbag error did not occur again, but before the update, it had only happened "once" (in 8 months).
The assisted lane change in Travel Assist was still not available, it should have been included from the start... it was also supposed to be addressed by the update... but it simply wasn't present, probably due to my "Monday/ demo vehicle."

Such an app for the phone usually gets an update pretty quickly - I would find it very interesting to know what (other) hardware and software versions are present in your Leons!
Since there were already problems with the update at the workshop, I suspect there will be a big "OverTheAir" package, but feel free to share your experiences! ;)
 

Attachments

  • 20250804_145618.jpg
    20250804_145618.jpg
    917.5 KB · Views: 17
Last edited:
Here you have my version and status again, I am "unfortunately" also one with part number A, so apparently one of the first devices...
But luckily I have few problems, the only thing that is "still" not included for me was the entry assist, where the seat moves electrically backwards...
 

Attachments

  • IMG_6382.jpg
    IMG_6382.jpg
    639.1 KB · Views: 36
The only thing that I "still" don't have included is the entry assist, where the seat moves electrically backwards...
I have deactivated it immediately. If you press the start button too quickly after getting in, the seat stays where it was at that moment and no longer moves forward. It’s more annoying than helpful.
 
@Ice-Mark just like with me, unfortunately also Type A where the entry assist is missing.

According to my dealer, no update is available either
 
@Sniker Thanks for the info, I had hoped to ask for an update at the next tyre change....
 
Hello everyone,
If you'd like, I can share my version of the Italian car Cupra Leon VZ from 2025.

I also want to mention that I have encountered these issues:

- Rear light error warning (I've noticed this happens if I start the car too quickly).
- The profile is unsynchronized and stuck in 1970 (support says this will be resolved with a future update, but they haven't specified when).
- No option for "easy entry" with the seat automatically moving.
- I've had the car for about 6 months, and only once did it show an error in the driver assistance system.
 

Attachments

  • IMG_3863.JPEG
    IMG_3863.JPEG
    1.1 MB · Views: 22
Last edited:
Hi @lastangel and thank you!
Your Numero di ricambio del dispositivio have no A or B at the end, this run at an older software version... 🫣
 
Hi @lastangel , get in contact with your dealer/ Cupra Service Partner and ask for the update, as mentioned from be above

Beitrag im Thema 'Update News' https://cupra.forum/threads/update-news.256/post-10522

Sw Version 2565 is the least you should get. This solved some account sync issues with mine, Infotainment was reset during the update and after I set everything up again the sync seemed more reliable.

Apparently the seat adjustment is only supported with a hardware number ending with "...B". At least users with these parts numbers reported that the feature works for them, others couldn't get it working.
 
@coopra , in the Manual* is mentioned that easy entry should be available. The question is why this isn't available for the first released cars.

@Sniker, I have an appointment for a software update by the delear beginning September. I now have H10 with 2460, without the A or B. I asked my delear what the software version will be, but unfortunately he didn't give me because maybe a new version could be available. I will let you know what the version is after visit.
 
@Sniker, I have an appointment for a software update by the delear beginning September. I now have H10 with 2460, without the A or B. I asked my delear what the software version will be, but unfortunately he didn't give me because maybe a new version could be available. I will let you know what the version is after visit.
With version 2460 my device number didn't show an A or B neither. But after the upgrade to 2565 it ended with "A".

Maybe in the "first edition" there was no other part/device in sight, but in the meantime to the new Version (released April 2025) they already used newer Hardware builds so they have the old ones the "..A".
Just assuming, no proof of that.

I didn't have electric seats but my car was missing the park assist and also the assist to automatically switch lanes within Travel Assist mode (on highways just Tipp the signal to change lane, the car does the steering on its own).
 
@waterpolo I'm curious. As I said, I still have the "A" there, so I don't think that has anything to do with your update...

@coopra habe von anfang an das "A" da stehen, es wurde danach kein Update mehr gemacht, hat denke ich damit dann auch nichts zu tun ^^
Habe im März das Auto bekommen...
Der Travel Assist mit Spurwechsel ist dennoch drinnen.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top