Vibrations starting at 75 km/h (slight at the steering wheel) and strong vibrations of the entire body starting at 135 km/h.

Heiko0510

War schon mal da
Supporter
Hello,
I have been driving the Tavascan VZ with 21" wheels and Hankook ION EVO SUV tires since November 2025. The vehicle has been in the workshop 4 times because of this.
The following measures have been carried out according to the workshop so far:
- Wheels balanced and swapped from front to back, but they forgot to adjust the tire pressure
- Wheels from an identical vehicle mounted
- Replacement of the "front drive unit" with subsequent adjustment of alignment and camber

Unfortunately, none of this has brought any significant success so far; the only change is that the speed range in which the vibrations occur has marginally shifted upwards.
Not to mention the already well-known "software issues..."
 
Moin @Heiko0510 und willkommen im Forum.

klingt nach Radialkraftschwankung / dynamischen Höhenschlag, die Geschwindigkeitsbereiche sind typisch (= die Reifen werden unter Last "oval"). Bei 75km/h hast du die erste Resonanzfrequenz an der VA und bei 135 kommt ggf. die Hinterachse dazu und das ganze schaukelt sich auf.
Je größer der Felgendurchmesser und je kleiner die Reifenflanke wird, desto stärker wirken sich die Effekte aus. Bei hohen Fahrzeuggewichten (beim Tavascan weit über 2t) verstärkt sich das ganze noch.

Das Problem wird sehr wahrscheinlich durch einen oder mehrere Reifen verursacht. Es gibt spezielle Wuchtmachinen, die "unter Last" messen (Road-Force-Messung) und genau für solche Probleme gedacht sind.
 
Moin @Heiko0510 und willkommen im Forum.

klingt nach Radialkraftschwankung / dynamischen Höhenschlag, die Geschwindigkeitsbereiche sind typisch (= die Reifen werden unter Last "oval"). Bei 75km/h hast du die erste Resonanzfrequenz an der VA und bei 135 kommt ggf. die Hinterachse dazu und das ganze schaukelt sich auf.
Je größer der Felgendurchmesser und je kleiner die Reifenflanke wird, desto stärker wirken sich die Effekte aus. Bei hohen Fahrzeuggewichten (beim Tavascan weit über 2t) verstärkt sich das ganze noch.

Das Problem wird sehr wahrscheinlich durch einen oder mehrere Reifen verursacht. Es gibt spezielle Wuchtmachinen, die "unter Last" messen (Road-Force-Messung) und genau für solche Probleme gedacht sind.
Hallo Milan,
vielen Dank für deine Info. Ich werde das mit der Werkstatt besprechen. Das würde aber bedeuten, wenn die Werkstatt die Räder bereits auf der Hunter Maschine gehabt hätte, dass der/die Reifen eigentlich ausgetauscht werden muß/müssen, oder?
 
Hello, I am Firat from Switzerland, I drive a Cupra Formentor VZ310 and I have or had the problem as well, I ultimately bought new tyres (Michelin Crossclimate Sport3) hoping that the vibrations would decrease or even disappear. However, without success, I had it balanced twice at the Cupra workshop. The master said during his round trip that there were no vibrations or that he felt nothing. He says the tyres have saw teeth 😁. Anyway… then I found a Road Force Hunter workshop, and had it balanced, the first time it got worse, then I complained and expected them to balance it again with the Hunter and drove 200 kilometers for the second time. Now after the second time it has become significantly better. But well, I think the new highway surfaces/roads today are the problem. I think you have to live with it. I will check the tie rod ends before the upcoming MFK appointment. According to the Cupra workshop, everything was fine after the two-month inspection… I have no idea, it’s frustrating for everyone who has the problem.
 
Hello,
the issue with the new tyres and road force measurement has already been done, unfortunately without much success... previously, the front drive motor was already replaced. In my opinion, the suspension is more or less the cause of this. My vehicle exhibits noticeable "suspension knocking," especially on road irregularities, manhole covers, etc.
Furthermore, the software is also not functioning properly in other areas... I have various errors, including in the locking system, saving favorites in the infotainment system, and possibly also in controlling the upper air vents of the air conditioning... my suspicion regarding the suspension problem is that the solenoids of the damping system may not be controlled correctly, which could also explain the knocking, even in Comfort mode... but as I said, these are just suspicions... the current software version should, in my opinion, also not be the latest... acquaintances also drive the same model, but this vehicle has at least a 2-step higher software version installed... mind you, it is still the "old" model, but 8 months younger... so it is likely that a software problem in many areas is responsible for the aforementioned issues... but how and why??? I recently test drove a Skoda Elroq RS, so the same drive, DCC suspension, 21" wheels, etc., without any problems... compared to my Cupra Tavascan VZ, it "floated" over road irregularities, manhole covers, etc...
 
Hello, I just wanted to know how you solved the problem or how you plan to solve it? Or do you accept this vibration like I do? It's annoying, but it only happens on the highway between 105 km/h and upwards, depending on the road surface. I'm at a loss and tired of constantly visiting the workshop. I still have 2 years of financing left. Slowly, I just hope these two years will pass and then I can sell it. It's really a shame. I look for solutions in countless forums, but there's never a solution.
 
Hello,
since you financed the vehicle and did not lease it, you could end the financing by inquiring about the remaining amount with the bank, paying it off early, and selling the vehicle...
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top