Istari

Ist öfter hier
Hello everyone,

maybe someone has had similar experiences and can help me.

I received my Leon ST VZ Hybrid (leasing) in December 24 with all-season tires on factory rims 8J x 19 Polar Black/Copper. Cupra does not offer all-season tires as standard.

Since I don't drive many kilometers, I decided to have all-season tires fitted and then return it with the original summer tires at the end of the lease.

I chose the Pirelli Cinturato All Season SF3 235/35 R19 91Y. However, I have now noticed that the rim protrudes about 1cm, meaning it stands over the tire, and therefore, for example, car washes, etc., are not an option, and besides that, it doesn't look nice in my opinion.

I asked today at the tire dealer and at Cupra if there is an all-season tire that, like the summer tires, sits flush with the rim, but without success. No one can tell me which tire would restore the original appearance, as everyone manufactures their tires with the basic dimensions, but the tread tends to be smaller or the tire is slightly stretched, which makes the sidewall rounder and essentially eliminates the rim protection.

I would be very grateful for any hints!

Best regards,
Istari
 
Last edited by a moderator:
Grüße,

ich erwarte meinen Leon ST VZ in den nächsten Tagen/Wochen und möchte ebenfalls Ganzjahresreifen draufziehen. Ich würde gerne die Contintentel AllSeastonContact 2 235/35 R19 91Y draufziehen und dazu die Alutec ADX.02 in 19". Die Felge dürfte auch laut Gutachten auf den Reifen und das Fahrzeug passen. Einzige Abweichung ist die Einpresstiefe. Bei Cupra steht eine ET von 49 in den Dokumenten - die Felge hat allerdings eine Einpresstiefen von 48.

Vielleicht kann hier ja auch jemand sagen, ob das ein Problem darstellt - wobei ich mir das nicht wirklich vorstellen kann.

@Istari ich würde dir die SF2 empfehlen, da diese auch bei einigen Tests besser abgeschnitten haben (im Vergleich zu den SF3).

VG
 
Hallo,

ich bin allmählich an dem Punkt, dass es mir egal ist, wie die im Test abgeschnitten haben, wenn die Reifen die entsprechende Sommerreifenoptik vermitteln würden.
Wenn ich vor dem Auto stehe, sehe ich die Felgen mit Reifen und denke immer..."Hässlich!"
 
@Istari Hast du mal ein Bild damit man sich das vorstellen kann?
 
@ST-VZ ob es ein Problem darstellt oder nicht, sagt dir die ABE/Gutachten der Zubehörfelge von Alutec. Die Angaben in der CoC sind für Fremdfabrikate/Felgen vollkommen irrelavant. Neben den äußeren Abmessungen, gibt es noch einige andere Faktoren wie die Traglast , die eine Rolle spielen.
Die Auflagen der ABE sind zu erfüllen, ganz einfach.
 
Hallo,

musste feststellen, dass ich die Themenüberschrift falsch hatte, nun korrigiert....

anbei die Bilder.....

Originalfoto mit Sommerbereifung ist auch anbei
 

Attachments

  • Cupra Räder 1.jpg
    Cupra Räder 1.jpg
    704.4 KB · Views: 172
  • Cupra Räder 2.jpg
    Cupra Räder 2.jpg
    828.8 KB · Views: 172
  • Cupra Sommer.jpg
    Cupra Sommer.jpg
    544.1 KB · Views: 172
Ist das tatsächlich ein 235er? Sieht aus als wäre der Reifen einfach zu schmal?
 
Wollte auch grad schreiben, dass ist doch niemals ein 235er
 
das ist aber ein 235/35 R19.....siehe Bild...der Reifenhändler hat das auch gleich kontrolliert und der Cuprahändler ebenfalls...

das war ja auch gleich mein erster Gedanke...zu klein...nee passt, sonst hätte er sich auch nicht auch der Felge gehalten...

ein weiterer Händler meinte, dass die Ganzjahresreifen eher eine kleinere Lauffläche haben, um nicht so schnell aufzuschwimmen etc.

daher werden die Flanken dann gerundet und heraus kommt sowas....

daher meine Frage, ob jemand 235er Ganzjahresreifen fährt die eine "höhere" Flanke haben und somit wie der Sommerreifen aussieht..
 

Attachments

  • Cupra Ganzjahresgröße.jpg
    Cupra Ganzjahresgröße.jpg
    533.7 KB · Views: 92
Also meine 18" Bridgestone GJR die ab Werk montiert waren haben die gleiche Form wie die Bridgestone Winter-/Sommerreifen auf der gleichen Felge.

Schreib doch mal eine Mail mit den Bildern und der DOT an Pirelli ob das wirklich so sein soll. Mal sehen, was da für eine Aussage zurück kommt.
 
Looks really "crazy"...

Do the tire data reveal anything more? Take a close look at the article, every little abbreviation - can anything be inferred from that?

I only know the opposite for tires, that the sidewall is a bit thicker, as "rim protection," then you have, for example, an "FS" in the article name...

The tire width of 235 is fixed, so it should be measurable... either on the car with a tape measure or by removing a wheel and examining it closely :-/

You could also check the tire pressure.

Let me know what comes out of it - 8J and 235 are actually ideal, I can't explain that either - I'm interested in the resolution :)

Edit: Does the tire look the same all around, with the same distance everywhere? Are all four wheels the same?

Edit2: In the last picture, it looks a bit like the tire is not mounted 100% correctly, or is that just an illusion??
 

Attachments

  • Screenshot_20250318_135922_Chrome.jpg
    Screenshot_20250318_135922_Chrome.jpg
    501.6 KB · Views: 79
Last edited:
Das macht für mich auch sehr stark den Eindruck, dass bei der Montage was schief gelaufen sein könnte und der Reifen nicht ganz auf die Felge gesprungen ist.

Sieht es auf der Innenseite der Räder denn genau so aus?
 
Wenn er "nicht ganz auf die Felge gespungen" wäre, würde das Bild noch anders aussehen, dann müsste die Wulst iVgl zur Kante noch weiter innen stehen, aber die Wulst ist in dem Fall der äußerste Punkt, was eigentlich nur der Fall ist, wenn die Felge zu breit für den Reifen ist bzw. der Reifen zu schmal für die Felge.
 
Hello everyone,

so I went back to the tire dealer, who took another look at everything... they are mounted correctly... aside from that, the tire would have already given up or lost air... in the meantime, I also drove at about 210 km/h, by then something would have moved.... the Cupra dealer confirmed this as well...

to the questions:

Yes, all tires look the same.. tire pressure is correct...

regarding the "tire width"... it is not standardized or anything... each tire manufacturer just has to orient themselves to the rim, so that the "bead" or inner side sits correctly in the rim, how wide the "tread" is, doesn't matter at all... if it was designed narrower, then it looks like mine...

just measured the tread... Hankook summer tires 24 cm... Pirelli all-season tires 20 cm.... so 2 cm narrower inside and outside, which causes the tire sidewall to move inward, each tire manufacturer can determine that for themselves...

Pirelli's phone inquiry was ignorant or just meaningless chatter... every tire is different... tralala.... my email with photos has not been answered so far...

Wrote to Continental and Michelin... also difficult, as the attention span of the employees obviously does not suffice for an email longer than 3 sentences... every time the response... Pirelli tires do not belong to our group.... every time I had to explain again whether they could tell me if their tires would be better suited..... at least, Continental could then tell me that the "sidewall width" is the measure of things... so measured from sidewall to sidewall...

Michelin, however, did not know so far how it is with their all-season tires... they are still measuring....

my Cupra dealer also had a car with all-season tires on the lot in the meantime... looked just as shabby... but probably also a Pirelli.....
 
Last edited:
Dann hat Pirelli wohl eine Charge zu schmaler Reifen produziert ..
3,5cm wären mehr als 10% Abweichung, das ist mMn keine Toleranz mehr.
 
es gibt schon etwas, wo sich reifenhersteller orientieren

ETRTO - European Tyre and Rim Technical Organisation

Leider gibt es hier jedoch dennoch je Hersteller unterschiedliche Toleranzen bei der Reifenherstellung.
Dazu kann man einiges an ergänzenden Infos ergooglen.
 
zu der "Reifenbreite" ...die ist nicht genormt oder sonst was...jeder Reifenhersteller muss sich dann nur an der Felge orientieren, dass die "Wulst" oder Innenseite richtig in der Felge sitzt, wie breit dann die "Lauffläche" ist, ist völlig egal...wenn sie schmaller gestaltet wurde, dann sieht das so aus wie bei mir...

nur mal Lauffläche gemessen... Hankook Sommerreifen 24 cm... Pirelli Ganzjahresreifen 20 cm....
Naja, da haben wir es doch ;)

Was heißt denn, die Breite ist nicht genormt..??
Du bestellst einen Reifen mit den Daten für die Breite, welche 235mm beträgt.
Wenn du nur rund 200mm geliefert und montiert bekommst, würde ich da eisern bleiben und reklamieren.

Wenn er sich quer stellt, soll der Händler selbst den Zollstock anlegen und dir eine Stelle zeigen, an der er die Breite 235mm beträgt..
 
  • Like
Reactions: ekm
The width is not just the width... there is a tread... which varies with each tire... sidewall width... also differs among manufacturers, within certain limits...

I don't know the exact technical terms... but the bead(?) or the tire/wheel interface must fit so that the tire stays on the rim; from the bead on, the tire can go "up" straight, like with summer tires, or if, seemingly like with Pirelli, the tread is a bit narrower, then the sidewall aligns a little.

You can especially see this with those "thick" tires that have a "height" of 50 or 60 mm; the tire looks fatter or overhanging at times or a bit "slimmer"...
 
Last edited by a moderator:
Wenn das für dich so ok ist, machen wir einfach einen Haken an die Sache. Sieht vielleicht in der Realität auch gar nicht so krass aus, wie es auf dem Bild des HR rüber kommt. Wenn ich dort den VR von weiten sehe, sieht es schon nicht mehr so extrem aus (würde vom Profil her vermuten, dass da auch der Pirelli drauf ist.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top