When braking and starting, the Brembo makes a clicking noise.

SirOssy

Kennt sich aus ★
Hello, I was traveling in Italy the other day and at moderate speeds between 30 and 50 km/h with the side windows down. Every time I accelerated (started moving) and when braking, the front Brembo brake made a clicking sound. Like something is hitting somewhere. Not a rattling, just a click. Do you experience this too, or is it a defect or problem with the Brembo brake?
Regards,
SirOssy
 
On both sides? It would be good to have a little video. "Click" is a relatively vague definition :unsure:
 
As soon as it happens again, I'll try to record a video. In Italy, it was daily. Currently, it's hardly audible. Maybe it's also due to the temperatures.
 
How can I upload a video? I can only upload images by attaching files. I would have recorded the clicking now.
 
You can't do that here; you need to upload the video on YouTube or something and then post the link here.
 
Hello,
there is finally news. The clicking was not the brake, but the following TPI 2064631/2.
The Technical Product Information (TPI) 2064631/2 concerns a known issue within the VW Group (including VW ID.3/ID.4, Skoda Enyaq, Cupra Born). It involves a one-time metallic clicking or popping noise from the rear axle area that occurs during acceleration, braking, or during load changes (e.g., switching from forward to reverse gear).
The cause and repair:
The noise is caused by play in the gearing between the drive shaft and the wheel bearing. The remedy according to TPI stipulates that the drive shaft must be properly cleaned and re-glued into the wheel bearing. It is essential that the vehicle remains stationary in the workshop for about 24 hours after gluing so that the adhesive can fully cure.

Regards
SirOssy
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top