Cupra Leon ST Midnight negro metálico

  • Iniciador del tema Iniciador del tema Nick
  • Fecha de inicio Fecha de inicio

Nick

Ist öfter hier
Saludos a todos,

Soy Nick, tengo 36 años y vengo de un Audi A4 B8 que me ha acompañado fielmente durante 8 años.

Hasta ahora estoy muy satisfecho con mi nuevo ST.

Todo funciona y como híbrido con 272 CV, tengo suficiente reserva para llegar rápida y relajadamente a cualquier lugar.

Como estoy sentado desde la fuente, ya he hecho que las salidas de aire y las tapas de los espejos sean refinadas con carbono cobre original de Cupra.

Adjunto algunas fotos de mi Leon ST.
 

Archivos adjuntos

  • 1000054374_copy_1998x1124.jpg
    1000054374_copy_1998x1124.jpg
    1,8 MB · Visitas: 124
  • 1000054370_copy_1124x1124.jpg
    1000054370_copy_1124x1124.jpg
    916,3 KB · Visitas: 115
  • 1000054362_copy_1824x1124.jpg
    1000054362_copy_1824x1124.jpg
    1,2 MB · Visitas: 114
  • 1000054365_copy_632x1124.jpg
    1000054365_copy_632x1124.jpg
    323,6 KB · Visitas: 107
  • 1000054363_copy_632x1124.jpg
    1000054363_copy_632x1124.jpg
    357,1 KB · Visitas: 102
  • 1000054361_copy_632x1124.jpg
    1000054361_copy_632x1124.jpg
    398 KB · Visitas: 103
  • 1000054372_copy_1124x1124.jpg
    1000054372_copy_1124x1124.jpg
    1,1 MB · Visitas: 107
  • 1000054373_copy_1124x1124.jpg
    1000054373_copy_1124x1124.jpg
    971,2 KB · Visitas: 106
  • 1000054369_copy_632x1124.jpg
    1000054369_copy_632x1124.jpg
    362,3 KB · Visitas: 110
  • 1000054364_copy_1998x1124.jpg
    1000054364_copy_1998x1124.jpg
    1 MB · Visitas: 118
@Nick danke für deine Bilder und viel Spaß mit deinem Fahrzeug. Die Carbon-Optik schaut sehr gut aus. :love::love::love:(y)

Da könnte ich mich nun etwas ärgern, dass ich ein Leasing Fahrzeug habe ;)
 
Meiner ist auch Leasing , die Teile sind ja fix getauscht. Und für Tauschteile bezahlt man nicht die Welt.
Lüftungsdüsen waren 120€ alle 3 und Kappen sind 50€ das Paar für Tauschteile ohne die Veredelung.
Verkauft bekommt man diese Sachen immer ohne Probleme.
 
Da du da vom Fach bist und dich auskennst, ist es mit Sicherheit einfacher. Ich habe handwerklich zwei linke Hände :ROFLMAO: :ROFLMAO: :ROFLMAO:
 
Die Lüftungsdüsen kannst du direkt an dem grauen Rahmen nach vorne raus ziehen das geht eigentlich echt einfach. Bei den Spiegeln muss das Glas raus. Das geht mit einem Saugnapf schnell und präzise.
Eigentlich ich jedem machbar wenn man etwas vorsichtig walten lässt;)
 
Hast du die Rahmen laminiert und dann nochmal lackiert?
 
Sieht sehr gut aus. Ich habe bisher nur auf Stabilität laminiert (Biketeile), schön habe ich noch nicht probiert.
 

* = Publicidad
Los enlaces marcados con un asterisco (*) son enlaces de afiliados. Si haces clic en uno de estos enlaces y realizas una compra, recibimos una comisión de la tienda online o del proveedor correspondiente. Esto no supone ningún coste adicional para ti ni modifica el precio que pagas.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Atrás
Arriba