DashCam

Uli 1008

Ist öfter hier
Hello, I would love to hear about experiences with installing a DashCam in the Terramar. Which model would be good, is the wiring manageable for someone who isn't a car mechanic, or should it be done professionally? Thanks for the information. Greetings from Upper Lusatia.
 
Hallo Uli,

ich kann jetzt nur für eine FitcamX berichten: Ist (relativ) easy beim Einbau, keine große Verkabelung - war für mich wichtig, da ich nicht am Airbag vorbei wollte. Nur mir ist beim Abbau der Verkleidung gleich der Innenspiegel mit abgefallen, dadurch konnte man sehr gut das Kabel vom RLS abziehen und wieder aufstecken. Mir ist aber leider immer wieder der Spiegel beim montieren der Verkleidung runter gefallen. Bis ich aus lauter Verzweiflung die Klammern vom Spiegel etwas nach innen gebogen hab, ab dann war es alles ganz easy. Ich Denke aber wenn der Spiegel noch dran ist, ist es ein ganz schönes Gefummel an das RLS Kabel zu kommen, das das unter dem Kabel für den Innenspiegel sitzt.


Die Qualität der FitcamX ist leider nicht so dolle, sie wird mit 4K beworben, aber der verbaute Sony IMX 335 CMOS Sensor kann nur 2592x1944, also ist es kein natives 4K und kann nicht mit echten 4K von Viofo oder Vantrue mit Sony Starvis2 Sensor mithalten. Aber besser als gar nichts. Ich würde, wenn Sie mal defekt geht, eine andere an das Y-Kabel dran operieren.
 
Ich bau mir gerade das System von Garmin mit zwei Kameras ein. Inkl. Parküberwachung.
Wenns klappt, sollte die vordere Kamera heute Nachmittag drin sein.
Ich bau mir dazu eine USB Buchse an die Verkleidung der Frontkamera. Lustigerweise ist das Teil sogar dafür vorbereitet (vermutlich passt der Spannungswandler von Skoda - ich arbeite aber mit freier Verkabelung).
 
Ich bau mir dazu eine USB Buchse an die Verkleidung der Frontkamera
Die Überlegung hatte ich auch, aber gibt's da oben überhaupt Dauerplus? Weißt zufällig wo die USB Buchse bei Skoda sich den Strom herholt?
 
Wenn ich euch richtig verstehe, dann kommt die USB Buchse auch im Bereich des Spiegels damit also an die gleiche Stromquelle wie die FitcamX richtig?
 
Das Skoda-Teil hat m.w. bei den Autos ab Werk auch nur Zündplus.

Ich hatte eine Einbaustory zu einem Superb gesehen, da legt er das Kabel über die A-Säule runter zum Sicherungskasten.

Hier in Beitrag #43 https://www.skodacommunity.de/threads/usb-c-fuer-dashcam-nachruesten.133676/page-3


Ob das Teil tatsächlich passt, kann ich aber nicht sagen. Die Blende beim Terramar hat aber exakt an der Skoda-Position eine Verrastung für irgedwas... Zusehen an der Ecke im Bild unten rechts.

20260406_143143.JPG

Meine erste Idee sieht so aus:

20260406_144453.JPG

Inzwischen hab ich die Einbaubuchse verkleinert (Schlüsselfeile) und das Endergebnis wird so aussehen:

20260503_152756.JPG
 
Wenn ich euch richtig verstehe, dann kommt die USB Buchse auch im Bereich des Spiegels damit also an die gleiche Stromquelle wie die FitcamX richtig?
Ich lege das Kabel runter zum OBD und benutze den Stromanschluss von Garmin für die Parküberwachung.
 
Ich bin der Meinung der Anschluss am Spiegel hat auch Dauerplus. Ich hatte Sonntag beim verschlossenen Auto die "Leichen" von der Fronscheibe entfernt und dabei hat sich die FitcamX aktiviert (zumindest ging die blaue LED an, ob es eine Aufnahme gestartet hat muss mich mal prüfen).
 
I believe the connection at the mirror also has constant power. On Sunday, while the car was locked, I removed the "bodies" from the windscreen, and during that, the FitcamX activated (at least the blue LED turned on; I need to check if it started recording).
No, there is no constant power at the RLS; the 12V is supplied via "Kessy." The Fitcam creates a sort of ignition power from the LINBus that allows the camera to start. If there were constant power there, it could also have a "Park mode."

@Schmitzibu that's exactly how I want to do it when the FitCam gives up the ghost, to then connect a "proper" A119M Pro to the RLS. I already have the 12V-5V converter, I think I can still fit that under the cover.
 
Last edited:
@Bean Das dachte ich eigentlich auch, aber als ich die Scheibe geputzt habe, war der Schlüssel außer Reichweite. Ich schaue mal ob sich das reproduzieren lässt oder das Fzg in dem Moment gerade evtl. kommuniziert hat und deshalb online war.
 
So, der Strom für die vordere Kamera ist verlegt.

Der Deckel der Assistenzkamera und die A-Säulenverkleidung sind echte Endgegner.

Das mit dem Kameradeckel hatte ich schon erwartet und deswegen frühzeitig einen Ersatzdeckel besorgt. Inzwischen hab ich aber auch meine Taktik, wie der Deckel ohne Blessuren runtergeht (ist nur schwer zu erklären - wer Tipps braucht, kann sich aber gerne melden).

A-Säule: insgesamt drei Clips. Zwei aus Blech, einer Kunststoff. Der Oberste aus Blech ist noch dazu 2-teilig. Man bekommt es raus, wenn man mit einem flachen Hebel zwischen Blech und Airbag durch von unten her in Richtung Dach fummelt. Wenn man soweit ist, dass man in den Spalt zwischen Himmel und A-Säulenverkleidung reinschauen kann, hilft eine kleine Taschenlampe um den Schlitz mit dem Clip zu sehen, und dann kommt man schon drauf.

Den Deckel seitlich am Armaturenbrett bekommt man hingegen sehr gut ab. Nur muss man aufpassen wie ein Schiesshund, dass die herausspringenden Metallclips nichts verkratzen, insbesondere am Ausströmer oben.

So, jetzt noch ein paar Fotos...

20260505_135631.JPG20260505_135636.JPG20260505_140100.JPG20260505_140104.JPG
20260505_142633.JPG
20260505_142642.JPG20260505_144047.JPG20260505_144057.JPG

Hier noch schematisch das Langloch der A-Säule. Der schwarze Hebel muss in Pfeilrichtung bewegt werden, damit der Clip oben aus dem T-förmigen Schlitz springt.

20260505_135654~2.JPG

Für heute ist Schluss. Freue mich schon auf die hintere Kamera (muss in die Heckklappe):eek:🤮
 
Ich hab heute das Kabel für die hintere Dashcam verlegt.

Was soll ich sagen. Der Terri ist echt ne Bitch, was Verkleidungen und Türdichtungen angeht. Ich wollte schon abbrechen, weil ich das Kabel nicht durch die Kabeltülle zwischen Karosserie und Heckklappe bekommen hab. Beim letzten Versuch hats dann geklappt. Hatte was von Proktologie.

Beim Abnehmen der Heckklappenverkleidung oben mittig sind prompt 2 der Halteklips mit samt der Kunststoffaufnahme abgerissen.
Und die Dichtung der hinteren Tür sitzt auch nicht mehr richtig.

Ich poste absichtlich keine Fotos, denn das ist wirklich nicht zur Nachahmung geeignet und ich werds nie wieder machen.

Mit knapp 49 bin ich wohl zu alt für so nen Scheiss.
 
So with my Leon ST, I removed the trim several times (because of the DAB interference), including the cover from the body to the tailgate. That was no problem. I had practice/tricks for threading it through, as I had spent years fiddling Bowden cables and brake lines through bicycle frames.
 
The part is definitely constructed differently in the Leon. The entire cover is made of very thin plastic and secured with 11(!) retaining clips. The two on the far right, which latch onto the side trim, have broken off.

I threaded it through the grommet using a cable insertion aid. I carefully spread the headliner and then reached in from underneath. The difficult part was the opposite side in the flap, because you can’t see anything (it’s positioned vertically upwards) and everything is hidden behind several layers of metal. So somehow I had to get the nylon aid through far enough to be able to grab it at the top...

Now here’s a photo at last...

20260604_132527.JPG
 
Oh sh.., yes, that looks significantly more complicated. The routing of the cables is central and directly accessible from both sides (or I had them unhooked at the top). The trim is also smaller, as the window pillars are not involved.
 
Now you see...
 
The visible small cables would still bother me, but the implementation with the USB-C ports is really awesome 👍
 
Thanks. But it just doesn’t work without a cable.
 
Yes, of course, although I realised afterwards that you probably can't even see the cable at the front from the driver's seat, and at the back it is even less noticeable.

The connections both basically serve only as power supply; you have two separate cameras, not one with an additional rear camera, right?
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top