DIY Accessories

Now you're starting with carbon too 😂

But for that, I would first need to make a mold 🙂
... although I could mill it out of wood, that would be easier to assemble 🤔

I also have carbon fabric and resin lying around somewhere.


@Killboy The price comes about if I were to have it printed by an external service provider. And I do not intend to do that.... And how @ekm It's already been said that this is about doing it yourself. I find your comment with the "lol" a bit inappropriate.
 
I meant it with the carbon that at 800-900 euros for the external printing, buying a carbon cover would be the better choice. But since that variant is not up for discussion, that doesn't apply either. A self-created 3D version remains unique.😉

Making carbon oneself is actually not that expensive. Resin and carbon laminate cost no more than 100 euros for materials.
The labor-intensive part is the negative molds that need to be made to create both the lower part with the mounts and a nice upper side made of carbon. That's more of a labor of love. And if you haven't done something like this before, it will also take a few attempts.

I had also considered refining my cover only as a cover with a layer of laminate since I still have a leftover piece that would be the same size. But then I decided on the painted variant. Simply because it looks better to me.
If I had the VZ and possibly an intake with a carbon cover, it would look nice again when you have a large area made of carbon.
 
"I find your comment with the 'lol' a bit inappropriate".... I also tinker with quite a bit, but at those prices, my will would fade.
 
Well, the price is, as mentioned, with an external service provider. The way Milan is planning it, the printing will be significantly cheaper; the working time does increase, but that's part of the fun.
 
I just calculated it. Printing it myself from glass fiber reinforced nylon costs €50 for materials + €5 for electricity (50 hours of printing time). On top of that, there's special glue for nylon, sanding material, a few screws, and paint. All in all, about €100 + labor time.
 
A car is for many not just a means of transportation, but also a hobby. And hobbies do not always correlate directly with reason or cost-effectiveness. Sometimes you invest a lot of time and money into something or develop something yourself that might already exist elsewhere. But that is exactly what makes a hobby appealing. The journey is often just as interesting as the result.
 
I need to get something off my chest here.
I always find it mega and fascinating what is shared here by @Milan so it will be conjured.
I found everything great, just that there was nothing so far that I absolutely must have, as I wouldn't use it. (Maybe the cheese grater 😊) But I would take this cover immediately even if it seems a bit expensive. It is handmade and that should also be compensated.
So if you @Milan If you offer it, I'll take one. I believe the sight would delight me every time I open the bonnet🤩.
 
I would even go so far as to say that the car is for many - including me - not just a means of transportation, but emotion and passion.
I completely agree with you, I see it the same way. 👍 My statement was more about the contrast between reason and hobby. Not everything done out of passion has to be economically sensible or rationally understandable. That's exactly what makes a hobby. 😄
 
  • Like
Reactions: ekm
I can sign that right away! When I think back to the (bicycle) lightweight era, when everything that saved weight at 1€/g was a bargain for the "crazy ones," or when you spent 2 hours machining a chainring just so the hanging scale could show 20g less again.🫣
 
So if you @Milan If you offer it, I'll take one. I believe the sight would delight me every time I open the bonnet🤩.
I submitted my business registration on Monday. A part of this magnitude will probably only be available officially due to the effort involved*. However, I'm afraid that I will then have to remove the Cupra logos, or rather, I will have to design it in such a way that badges/inscriptions fit the originals from Cupra, such as the bonnet logo and the "CUPRA" inscription on the tailgate, for example... A solution will be found


*with community discount
 
So you're now creating an official accessory shop? (y)
You can basically get logos or lettering printed privately from talented people with a 3D printer. ;)

Ordering and applying the original logo would also be an option; ideally, the print would just need to have the appropriate openings.
 
You can basically get logos or lettering as prints privately from talented people with a 3D printer. ;)
And where you then have the coincidentally exactly matching print files from is also hard to keep track of with the amount of internet available (🤭)
 
Last edited:
... also the bonnet logo and the "CUPRA" lettering on the tailgate, for example... A solution will be found

Now I'm spinning this further... Engine cover with the illuminated Cupra logo from the Tavascan.... The nose lettering at the front should also be smaller than that at the rear and fit a bit better.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top