Self-built accessories

I don't have a proper shop; it's all just internal to the Forum here.

Besides the advertising stickers for the forum (Übersicht) I currently have the following items "in the programme":
  • Umbrella holder for the ISOFIX mounts on the rear bench in the boot (model-independent)
  • Card holder for under the centre armrest in the Leon (will probably also fit the Formentor)
  • Coin holder for the centre console insert from Amazon (latest model) for the Leon
  • Garage door opener conversion kit for 1- and 2-button transmitters for the Leon (will probably also fit the Formentor)
  • Cupholder insert with lid for the Leon (will probably also fit the Formentor)
  • Velcro holder for spray bottle/cleaning cloth for the boot (model-independent)
  • Coin and card holder for the Terramar (still needs to be field-tested)
 
@Milan wirklich tolle arbeit (y) Vielen Dank
 

Attachments

  • GTOpro-m7ZOyYgF.jpeg
    GTOpro-m7ZOyYgF.jpeg
    918.7 KB · Views: 85
  • GTO2out-8vn0wIxL.jpeg
    GTO2out-8vn0wIxL.jpeg
    696.8 KB · Views: 83
@Milan etwas Werbung für dich kann ja nicht schaden 😇
 
That really makes me jealous when I see the remote control you have. :cry::eek:
Unfortunately, the "pairing" didn't work for me, so I have to do without this great accessory for now.
 
Normally, everything about this is in the Manual* of your regular remote control. It is important that you have the "master remote control" for the transfer, if there are two or more.
 
I have already tried everything.
It is probably due to a special additional coding of the original remote control by the manufacturer.
Optionally, I could buy an additional remote control for the gate system there, which @Milan then could dismantle it. but for me, about 45 euros is still too much in additional costs to try it without a guaranteed chance of success. I could/can stomach the 12 euros for the universal remote control recommended by Milan. 😉
 
Sometimes the universal ones just don’t work. I’ve had similar experiences with products from "Teletaster". Universal products don’t work there either, but they do have a very small learnable one that fits well into the storage compartment.
 
I also have an electric garage door, or rather an electric door for the showroom of my Spider from Hörmann, and an additional opener costs around 45 euros. But with this one too, you can expose the electronics and fit them into a custom housing.
 
Ab und zu gibt es sowas auch gebraucht bei ebay und co. Wenn man sowieso zerlegt, ist das Gehäuse (Gebrauchsspuren) ja egal.
 
@Milan wäre es nicht möglich den Abstand der beiden Knöpfe zu adaptieren? Die sehen ja gar nicht so unterschiedlich aus, dann müsste man doch bloß die Platinen selbst austauschen, oder denke ich da zu simpel?
 
@MarcelSTVZ Ich verstehe leider noch nicht ganz was du meinst. Die Knöpfe in meiner Konstruktion sind völlig unabhängig von der Platine, die werden per Kabel an die entsprechenden Stellen auf der Sender-Platine gelötet.
 
Der Lochabstand bei @Melfinos scheint sehr ähnlich zu dem deiner FB zu sein. Wenn er die regulär nicht ans laufen bekommt, wäre es keine Alternative den Lochabstand von seiner oben geposteten Original Fernbedienung zu übernehmen und Knöpfe mit samt Platine zu tauschen?
 
Ich glaube ich stehe auf der Leitung :unsure: Das ist genau das, was ich tue. In meine Konstruktion kann ich jede beliebige Platine einbauen, sofern sie klein genug ist. Aber nicht jeder ist nachvollziehbarerweise bereit dafür eine 50€-Originalfernbedienung zu opfern (das was ich hier mit Lötarbeiten mache kann ja auch schief gehen). Eine 10€-eBay-Fernbedienung ist ebenverschmerzbar.
 
Okay, dann stand ich wohl auf dem Schlauch und hab es falsch verstanden 😅 sorry
 
@Schmitzibu vielen Dank für die Idee. Ich gehe aber davon aus, dass auch eine separat gekaufte identische Fernbedienung nicht viel bringt, da ich mit Sicherheit nicht an den 128Bit Schlüsselcode des Herstellers komme. Mir bliebe nur die Möglichkeit eine zweite Fernbedienung für ca. 50 Euro beim Hersteller für mein Rolltor zu erwerben, welche vom Hersteller die Programmierung bekommt.
Da ich aber immer noch das Risiko der Platinengröße habe, möchte ich schlichtweg keine 50 Euro für einen Versuch in den Sand setzen.

@Milan hat es mit seinem Post #235 mein Problem richtig verstanden. 😉

Vielleicht "opfere" ich kurz vor Weihnachten 50 Euro für einen Versuch und mache mir ggf. ein Weihnachtsgeschenk, wenn es dann mit der Platinengröße und dem Löten von @Milan noch klappt. 😉
 
@Melfinos

Ich kenn dein Garagentor jetzt nicht und weiß auch nicht wie technisch bewandert du bist, aber meistens gibt es noch die Möglichkeit einen Taster für Auf / Zu an die Garagentorsteuerung anzuschließen. ( Da sind meist die lokalen Schlüsselschalter angeschlossen ) Rüste da doch einfach einen weiteren Empfänger nach, hier kannst du ja beim Kauf Rücksprache mit @Milan halten wegen der Platine der Handsender.
 
Liebe Leute, gestern Abend bzw. Nacht war es soweit und ich durfte mal wieder was von @Milan in Empfang nehmen.

Was soll ich euch sagen? Bilder sagen mehr als Worte….

Danke @Milan für deine erneut tolle Arbeit!
Komm gerne jederzeit vorbei wenn du wieder in der Gegend bist. Kalt sowie Heißgetränke stehen für dich bereit.
 

Attachments

  • IMG_8567.jpeg
    IMG_8567.jpeg
    1 MB · Views: 33
  • IMG_8566.jpeg
    IMG_8566.jpeg
    989.6 KB · Views: 32
  • IMG_8565.jpeg
    IMG_8565.jpeg
    1 MB · Views: 32

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top