So, here is the other problem.
The alleged air recirculation of the SUV was not connected, which I only noticed by chance when I was curiously looking around in the engine compartment.
Thus, there was a hole the size of a €1 coin about 10cm before the turbine's guide vanes in the intake, where, of course, all sorts of dirt was drawn directly into the engine without any filtration.
I don't have a specific question about it, but I would appreciate various assessments/opinions on it, especially regarding the point of sucking in potential particles that could damage the engine.
I fixed the whole thing; for that, I had to remove the pipe from the air filter box to the turbo (where the recirculation connection is also integrated), simply reassembling it was just not possible.







Edit: It is the return line from the SUV. I looked yesterday to see where the part is located. Unlike the EA888 Gen 3 and all weaker EA888 Gen 4, the part is not located directly behind the engine, but directly behind the engine fans, relatively low down. Nothing about changing it in 10 minutes...
The alleged air recirculation of the SUV was not connected, which I only noticed by chance when I was curiously looking around in the engine compartment.
Thus, there was a hole the size of a €1 coin about 10cm before the turbine's guide vanes in the intake, where, of course, all sorts of dirt was drawn directly into the engine without any filtration.
I don't have a specific question about it, but I would appreciate various assessments/opinions on it, especially regarding the point of sucking in potential particles that could damage the engine.
I fixed the whole thing; for that, I had to remove the pipe from the air filter box to the turbo (where the recirculation connection is also integrated), simply reassembling it was just not possible.







Edit: It is the return line from the SUV. I looked yesterday to see where the part is located. Unlike the EA888 Gen 3 and all weaker EA888 Gen 4, the part is not located directly behind the engine, but directly behind the engine fans, relatively low down. Nothing about changing it in 10 minutes...
Last edited: