SUV return not connected! VZ 2.0

dtmdriver

Forenfan ★★★
Supporter
Germany
So, here is the other problem.
The alleged air recirculation of the SUV was not connected, which I only noticed by chance when I was curiously looking around in the engine compartment.
Thus, there was a hole the size of a €1 coin about 10cm before the turbine's guide vanes in the intake, where, of course, all sorts of dirt was drawn directly into the engine without any filtration.
I don't have a specific question about it, but I would appreciate various assessments/opinions on it, especially regarding the point of sucking in potential particles that could damage the engine.
I fixed the whole thing; for that, I had to remove the pipe from the air filter box to the turbo (where the recirculation connection is also integrated), simply reassembling it was just not possible.
IMG_5997.jpegIMG_5996.jpegIMG_5994.jpegIMG_5993.jpegIMG_5992.jpegIMG_5991.jpegIMG_5990.jpeg

Edit: It is the return line from the SUV. I looked yesterday to see where the part is located. Unlike the EA888 Gen 3 and all weaker EA888 Gen 4, the part is not located directly behind the engine, but directly behind the engine fans, relatively low down. Nothing about changing it in 10 minutes...
 
Last edited:
Da würde ich mir keine Gedanken machen, denn üblicherweise verläuft die Kurbelgehäuse-Entlüftung ebenso in den Ansaugtrakt des Turboladers. Und was meinst Du was mit den Öldämpfen da alles für ein Schmier durch den Turbolader gezogen wird. Da ist die von Dir gezeigte Art der Nebenluft peanuts.
 
Mein Befürchtung ist, dass dadurch Dreck in den Motor gezogen wurde, welcher sonst vom Luftfilter zurückgehalten wird, wie z.B. Sandpartikel.
Leichter Ölnebel ist da eher weniger ein Problem für Lader und Motor, der könnte ggf. mal eins für die Drosselklappe/Ventilesitze werden, nach vielen 1000en Kilometern.

Da wir das Auto fahren wollen werden, bis der Motor stirbt, macht das am Ende dann vielleicht doch den Unterschied, sieht man aber erst nach 10 Jahren oder mehr, ob das jetzt ein Problem war oder nicht.

Beim Tausch von so einem Filter finden sich manchmal schon ordentlich große Partikel, zusätzlich zum allgemeinen Dreck, welcher haften bleibt.

Mal davon angesehen, dass die Endkontrolle bei Tabor* demnach sinnlos ist, wenn die sowas nicht entdecken! Ich hab lediglich einen Batteriewächter verbaut und etwas neugierig im Motorraum rumgeschaut...
 
Ich kann die Befürchtung schon verstehen, es bringt aber auch nichts, durch zuviel Grübeln Magengeschwüre zu bekommen, bloß weil der Wagen vielleicht nicht so lange halten könnte wie ein Baugleicher, bei dem der Schlauch von Anfang an korrekt montiert war. Es kann niemand in die Zukunft blicken, erst Recht nicht 10 Jahre voraus. Genieße den Wagen einfach...
 
Ich würde es zumindest dokumentieren und Cupra als Info melden, mit der Bitte um eine kurze Bestätigung. Dann ist es nachweislich und zeitlich zuordbar gemeldet, falls später Schäden auftreten.
 
I would at least document it and report it to Cupra as information, requesting a brief confirmation. That way, it is verifiably reported and time-stamped in case any damage occurs later.
If something happens in 5 years, that won’t help you at all. Cupra will wriggle out of it by claiming it "had nothing to do with it". There’s no way to prove anything anyway.

However, I would also see the whole thing as uncritical. To ease your mind, remove the intake hose and check the turbine. If there are any impacts visible there, something should be able to be done immediately under warranty.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top