Jürgen
Ist öfter hier
Hello everyone,
I have now been driving my new and first hybrid for over 3 months. So far, I have covered 4,000 km and was initially quite satisfied, but in the last 6 weeks I have already had to visit the workshop twice.
Among other things, I have recently often had the problem that I cannot switch from hybrid mode to pure electric mode.
The system then shows me “The electric mode is currently not available”……possible reasons are: A. The speed is too high. B. The battery charge is too low.
However, both statements are not correct, as the car was stationary each time and the battery charge was always between 50 and 90%.
The operating Manual* says the following about this:
To activate the electric driving mode, all of the following conditions must be met:
- The state of charge of the high-voltage battery is sufficient
- The driving speed is below 130 km/h
- The temperature of the high-voltage battery is above -10°C.
Incidentally, the temperature ranges at the time of the message were between +5 and 10°C each time.
In this respect, the workshop manager’s statement is unclear to me; this is a system-related message that does not indicate a fault.
Does anyone perhaps have the same problem and can explain it to me in more detail?
I have now been driving my new and first hybrid for over 3 months. So far, I have covered 4,000 km and was initially quite satisfied, but in the last 6 weeks I have already had to visit the workshop twice.
Among other things, I have recently often had the problem that I cannot switch from hybrid mode to pure electric mode.
The system then shows me “The electric mode is currently not available”……possible reasons are: A. The speed is too high. B. The battery charge is too low.
However, both statements are not correct, as the car was stationary each time and the battery charge was always between 50 and 90%.
The operating Manual* says the following about this:
To activate the electric driving mode, all of the following conditions must be met:
- The state of charge of the high-voltage battery is sufficient
- The driving speed is below 130 km/h
- The temperature of the high-voltage battery is above -10°C.
Incidentally, the temperature ranges at the time of the message were between +5 and 10°C each time.
In this respect, the workshop manager’s statement is unclear to me; this is a system-related message that does not indicate a fault.
Does anyone perhaps have the same problem and can explain it to me in more detail?