Window regulator/window switch is not working properly

Welcome! You have been invited by Gand-Alf to join our community. Please click here to register.
They have once again made something worse with the FL. I'm glad to be driving a VFL. The window lifts work perfectly there.
 
@ac-san Does it still work?

Because I have the same problem 🥴
 
@Angefixt I have been out riding my motorcycle lately and haven't really been able to observe it
 
Two weeks later still no call. Probably the driver's side window regulator is still not available.
 
Hello, I would write to Cupra myself. My navigation system crashed before my vacation. I was helped overnight via Over the Air, and additionally, a software was sent to my dealership that I didn't need since it has been working since then. I am satisfied.
 
I will wait another 1-2 weeks and then ask. It's nothing urgent, and strangely enough, the window on the driver's side worked perfectly three times in a row today... Not that it was really due to a slightly undercharged battery. As soon as I drove almost 3000 km on vacation, the thing AND Start/Stop just works again after months.
 
The "suspension"/The "failure" of the start/stop system is usually indeed a battery problem. It generally doesn't work for me either, only when I've driven 100 km or better more, it works 2 or 3 times again. Then it quickly stops working again...
 
The "suspension"/the "failure" of the start/stop system is usually indeed a battery issue

yes and no... fundamentally, it is not a "problem" of the start-stop system, but rather a system requirement.

Well, you predominantly drive hybrids; in the case of a pure gasoline engine, parameters such as battery temperature, state of charge, air temperature/humidity (inside/outside), current power consumption (...), are queried before the SSS becomes active. If the requirements are not met, the SSS does not activate and does not turn off the engine.

Conversely, if the SSS has turned off the engine at a stop (e.g., at a traffic light) due to favorable conditions, but those conditions are no longer met during the stop, the SSS automatically turns the engine back on.

"The state of charge of the battery" is not incorrect, but in relation to the SSS, it is only one parameter.
 
...In the pure petrol engine, parameters such as, among others, battery temperature, state of charge, air temperature/humidity (inside/outside), current power consumption (...) are queried...

Battery temperature? Is there a temperature sensor attached to the battery? That's completely new to me.
 
Well, basically it's not a "problem" with the start-stop system, but rather a system requirement.

Okay, you mostly drive hybrids; with a pure petrol engine, parameters such as battery temperature, state of charge, air temperature/humidity (inside/outside), current power consumption (...) are checked before the SSS becomes active. If the requirements are not met, the SSS does not activate and does not turn off the engine.
I had expressed myself inaccurately. The possible causes you mentioned are indeed correct, but in the case of my car's "non-functioning," the cause is the battery (this was confirmed to me by the Cupra technician who was brought to the dealership). :sneaky: Sorry for my hasty reaction...
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

Back
Top