Wireless charging of the mobile battery/Android Auto

Zsi

Kennt sich aus ★
Finland
What experiences are there with wireless charging of mobile phones? The symbol for wireless charging in my MJ 2026 Leon ST is mostly red, and the phone does not charge when it is in the console. Occasionally, it can be white, but after a short time, it always turns red again

I used the same phone in my previous car (Seat Leon ST 2021), which probably has the same components for wireless charging of mobile phones. There were no issues with wireless charging or Android Auto there.
 
Hi, das Symbol ist das Qi-symbol und tatsächlich nur fürs Laden.

Versuch mal, das Handy zu drehen und achte drauf, dass es richtig liegt. Vielleicht liegen die Antennen nicht richtig auf Deckung.
Alle sonstigen Gegenstände wie Brillen etc auch mal weglegen.
 
  • Like
Reactions: Zsi
Danke, aber ich habe das Handy bereits in vier verschiedenen Positionen ausprobiert (umgedreht, aufrecht, um 180 Grad gedreht usw.), ohne dass sich das Laden verändert hätte. Es befinden sich keine anderen Gegenstände an diesem Platz.
 
Ich habe es sowohl mit als auch ohne Handyhülle versucht. Die Hülle ist außerdem eine spezielle Art mit einem integrierten Magneten, um das kabellose Laden zu verbessern.
 
Mal mit einem anderen Handy probiert? Gummimatte mal herausgenommen?
Ist evtl. Wireless charging im Handy deaktiviert nach Softwareupdate o.dgl.?

Wie verhält es sich, wenn du AA nicht nutzt?
 
  • Like
Reactions: Zsi
Das Laden ist an und es erkennt das Handy, wenn ich es in die Konsole einlege, und das Qi-Symbol leuchtet auf. Nach kurzer Zeit wird das Qi-Symbol rot.

Habe es mit einem anderen Handy noch nicht ausprobiert, aber ich habe das Handy in meinem früheren Leon (Seat) getestet, wo es problemlos funktionierte. Ich werde meinen Cupra-Händler besuchen und das Laden in einem anderen Cupra Leon dort ausprobieren. Wenn es dort funktioniert, werde ich um eine Garantie-Reparatur bitten.
 
I switched wireless charging after one week off. The phone get very hot and charging speed is low. I charged with USB, unfortunately the ports in front console the speed is also low. For faster charging then you have to connect to USB in the middle console.
I don't understand why CUPRA or VAG doesn't have everywhere the same speed.
 
@waterpolo The phone gets very hot with wireless charge (when it works :( ), that's true. I still would like to use it as it is more practical especially when the trip is short. It is always a bit clumsy to use a cable, but it would be the fastest way to recharge when the phone battery is almost empty.
 

Attachments

Bei mir funktioniert das kabellose Laden erstaunlich gut. Ich nutze ein OnePlus 9 Pro mit Hülle, und der Akku lädt auch erstaunlich schnell. Ich denke es ist auch die Kombi aus Smartphone + Ladepad..
 
Müsste normalerweise auch mit Hülle problemlos funktionieren. Ich habe bei meinem Samsung S24 FE eine qualitativ richtig dicke Hülle von Eiger, und das Gerät lädt immer perfekt in der Ladeschale. Ich habe allerdings auch einen Cupra Leon von 2021. Mittlerweile wurden bei den neuen Modellen ja viele Features eher verschlimmert als verbessert, siehe auch ausfallende Assistenzsysteme, graue Weltkugel und flackerndes Ambientegesumms.
 
@Cupra-Klaus Du hast recht. Wenn ich meinen Seat Leon 2021 mit meinem Cupra Leon 2026 vergleiche, gibt es tatsächlich Unterschiede. Einige Dinge sind besser, einige schlechter. Bisher ist das Öffnen des Kofferraums über den Knopf und jetzt dieses drahtlose Android und Laden problematisch. Mein HMD Skyline funktionierte mit Seat kabellos zu 100% perfekt, aber mit Cupra, sehr schlecht. Ich denke, dass beide Probleme jetzt unter Garantie Aufmerksamkeit erfordern.
 
Hier überhaupt keine Lade- oder Hitzeprobleme (Terramar + Sony Xperia 5 iv mit Rugged Armor Hülle von Spigen).
Auch ausreichend schnell. Ich meine 15w statt der mageren 5w im Karoq zuvor.

Schade trotzdem, dass die Kühlung des Ladepads wie bei Kodiaq und Tiguan bei Seat/Cupra nicht umgesetzt wurde.

@Zsi: wirelesscharging läuft nicht direkt von der Antenne zum Akku, hier ist immer das SoC involviert. Zusätzlich belastet wireless AA das SoC ebenso. Da kann es zu einer deutlichen erwärmung kommen.
Probiere deswegen mal, wie es sich verhält, wenn du AA abschaltest und nur qi benutzt.
Lädt es dann?
 
Hm, vielleicht ist dieser Kommentar nun nicht angebracht, aber habe nicht lesen können welches Handy du hast.
Nur als kleines Beispiel auch für andere, meine Frau und ich nutzen ein IPhone, sie aber ein Mini, bei ihrem Handy müssen wir ab und zu mal genauer schauen, das es richtig liegt, damit es lädt, aber sonst hatten wir keine Probleme. Also was ich sagen will, die Größe (aufs Handy bezogen) :LOL: kann je nachdem auch eine Rolle spielen.

LG
 
  • Like
Reactions: ekm
@Ice-Mark I use HMD Skyline It has the latest Qi2 (equipped with a magnet) and as I mentioned before, it worked perfectly in the Seat Leon 2021. I would think that Qi2 should work since my CUPRA is four years newer than the Seat.
 
hm, all right, thanks for the info. Otherwise, the only option is to drive to the dealer; from a distance, you can't check much yourself, just look with another phone to see if it does the same thing. If so, it should be easier to reproduce it at the dealer. There are also one or two here in the Forum who had their shell replaced. Maybe you also have a defect or something that wasn't connected properly. Definitely have them check and inspect it.
 
Qi2 does not matter; the car cannot do that.
The HMD switches off wireless charging due to a heat problem.
 
I had the same issue. For me, it was actually due to the case. It was also one with MagSafe. Now I use a different one, also with MagSafe, and I have no problems.
Tell us what kind of phone you have and maybe also what kind of case.
For me, it works fine with a Galaxy S21 Ultra and S24 Ultra (with the right case or none at all).
 
I visited my Cupra dealer and we tested my Android phone in two other Cupra Leon models (MJ 2026). The same results. Then we used his iPhone. Again, the same results. The charger recognises the phone, but after a while the Qi symbol turns red

The common factor here is that both my Android phone and his iPhone have the Qi2 protocol. Since we saw the same problem in three vehicles with different phones, this points to a systematic issue. The problem is most likely with the implementation of the Qi2 protocol in the MIB4 infotainment system. Furthermore, the fact that the same phone works in a car with an older MIB3 system confirms this.

The Qi2 protocol was finalised this summer and obviously the final version has not yet been implemented in the VAG infotainment software. Those with a Qi2 phone (iPhones or some Androids) should complain to the manufacturer so that an update is released to fix this issue. In the meantime, using a USB cable is the only solution for Qi2 phones.
 
As already mentioned, I would be very surprised if the hardware were even qi2 certified. 15W charging power is also possible with qi(1), and it doesn't output any more than that.
 

* = Advertisement
Links marked with an asterisk (*) are affiliate links. If you click on one of these links and make a purchase, we receive a commission from the respective online shop or provider. This does not affect the price you pay.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Back
Top