Update News

@coopra , I have a VZ with electric seat. I also haven't the lane automatic switching. That was one of my points to ask for the software update. It's mentioned in the Manual*. If it's still not available after the update then we have a conformation that it isn't supported in the first FL edition. May be because Intelligent Drive package isn't the II version?
 
Zuletzt bearbeitet:
@Sniker : Interessant :) Wann wurde deiner gebaut und kam der direkt schon mit der 2565 ab Werk?

@waterpolo Yes, besides I was initially otherwise from the vendor it appears these two features are "missing" with the very first Facelift models - if you have detailed information about the packages, esp the intelligent drive, there are two different package IDs: Wf4 and Wf9 I think. For the park Assist my car is also missing certain sensors; I had them in front and back but not on the sides, one per fender/wheelhouse, so 4 in total.

If you were happy like me to be one of the very first Facelift drivers it's also bad news - you are currently stuck without these features. Same applies to the electrific seats I believe.

Because of other, technical, issues I returned the car and ordered a new one.
For you I really hope they get it working somehow. My dealer was in contact with Cupra and before the 2565 they were confident, they would be able to get it working by applying the update... hope they get it done for you.
 
Also ich hab jetzt bei mir grad nochmal geschaut und mit dem Zeitpunkt der Auslieferung abgeglichen. Seitdem nur Updates der Navigationsdatenbank.
 

Anhänge

  • IMG_7432.jpeg
    IMG_7432.jpeg
    1,9 MB · Aufrufe: 50
Spannend!
Der von @ST4N wurde also am 11.03.25 gebaut, Hardware mit -B und Software sogar schon 2632!

Meiner wurde gebaut 22.07.24, Hardware ohne Kennung bzw später -A, und ich musste bis April 25 warten auf das update - das war dann aber "nur" 2565.

D.h. bei Produktion im März wurde neuere Software ausgeliefert, als sie einen Monat später "nachträglich gepatcht" werden konnte...

Jetzt sind ja nochmal 4 Monate ins Land gezogen - wäre interessant, was jetzt aktuell ausgeliefert wird, und was als Aktualisierung verfügbar ist.. das ist ja leider völlig intransparent.. dafür, dass das rollende computer sind, wäre es schon toll, wenn man sowas wie "release notes" usw für seine Fahrzeug Software bekommen würde..
 
@coopra Da ja einige gerade auf ihr MJ26 warten, werden wir hoffentlich bald eine Info dazu bekommen! 👌
Zum Beispiel @Trock13 🙂
 
Zuletzt bearbeitet:
@coopra 2565 habe ich ja auch drauf, auch einer der "relativ" ersten Modelle...
Bisher läuft es aber sehr stabil bei mir, bis auf flackernde Beleuchtung und nur wenn man zu schnell startet....
 
..B und 2632 habe ich bei meinem auch schon und der war 48KW 24 produziert.
 
Dann ist Wahrscheinlich für:
Endung A - 2565
Endung B - 2632

die aktuell verfügbare Version 🫣

Sprich je nach Hardwarestand eine andere Softwareversion.
Würde auch meine Vermutung bestätigen, dass immer mit Hardwarestand „A“ der Komforteinstieg nicht verfügbar ist!
 
Zuletzt bearbeitet:
Sobald ich meinen haben sollte, werde ich sofort drauf achten und berichten - den Komforteinstieg fänd ich bei den Bucketseats schon sehr sinnvoll...
 
Mein Softwarestand.
Bisher keine wirklichen Probleme.
Höchstens die App und aktuell mal wieder dieses "Neue Einstellungen sind jetzt für Ihr Benutzerkonto verfügbar.Möchten Sie diese übernehmen?"
Ansonsten wirklich sehr zufrieden. Kein Ambiente-flackern, keine "Stuhl-probleme" (Sitzeinstellung ;) ) und auch kein Fahrwerksgeräusch.

Hab die Feststoffrakete jetzt seit dem 02. Juni also zwei Monate und 3226 km. Übermorgen gehts in den Urlaub nach Italien mit dem Wohnwagen, da kommen dann insgesamt noch mal rund 2.200 km dazu.
Ich werde berichten, wie der VZ333 mit dem Wohnwagen hinten dran auf dem Brenner performt.

Firmwarestand_Cupra.jpg
 
Guten Morgen Leute, kennt jemand das hier schon?
 

Anhänge

  • IMG_6577.jpg
    IMG_6577.jpg
    479,3 KB · Aufrufe: 101
@Ice-Mark
Rot auf schwarz sieht so nach Audi aus....
Wo bist du denn da unterwegs, Kontext? Oder woher hast du das, worauf zielt die Frage..?
 
Das scheint wohl das Boot Menü des Systems zu sein. An sich recht nutzlos außer man möchte ein Neustart des Systems durchführen. Dafür ist es praktisch. Ich glaub man kommt da rein wenn man den Power Button am Touchscreen sehr lange gedrückt hält.
 
Zur Erklärung, ist meinem Sohn im Leon passiert...
Er (gerade frisch 1 geworden) findet Auto super interessant und drückt freudig auch immer an allem rum und muss schauen was sich so verändert...
Ich weiß echt nicht wie, aber auf einmal ging bei mir der Bildschirm aus und dann kam zack das Bild hier :ROFLMAO: 🙈
Vor lauter Panik, er können mir hier was zerschießen oder alles verändern, bin ich fix wieder zurück gewechselt.

Ich nehme mal an, auf Version Information bekommt man auch nicht genauere Infos von den Steuergeräten oder?
 
@Ice-Mark , @rene18m , correct this is the boot menu. Here a software upgrade can be done. I did this by my previous VFL Leom ST model. The software has to be placed on a wiped USB drive. This boot menu can indeed be accessed by holding the power button for long time. This menu is for service purpose.
 
Zuletzt bearbeitet:
Hello CUPRA fans, today I brought my Leon ST from 07-2024 to the CUPRA service partner for a firmware upgrade. At the end of the workday the garage employee came to me and said the good news is that software upgrade was successfully installed. The bad news is that there are a few failures which are blocking the engine management system. Therefor the car cannot be started. The car is in the garage now overnight and hopefully tomorrow the failures are broken, fingers crossed.
At this moment I don't know which software version is installed.
 
@coopra , indeed the issue is with the control units. No future information received.
2024-07 = facelift model 2025
 

* = Anzeige
Die mit Sternchen (*) gekennzeichneten Links sind sogenannte Affiliate-Links. Wenn du auf so einen Link klickst und über diesen Link einkaufst, bekommen wir von dem betreffenden Online-Shop oder Anbieter eine Provision. Für dich verändert sich der Preis nicht.

cupra.forum · Alle Rechte vorbehalten · Dies ist kein Forum der Seat Cupra S.A.U.
Zurück
Oben